Digital BW, The Print

Bernd,
I know that there are "directions" for adjusting the placement of an image 
with the Piezo driver at the Piezo site, but it isn't the same as being able 
to place and image exactly where you want it on a page with a line or two of 
Text below.  For example, I recently saw a PR portfolio box with a number of 
sheets each with an image on the top 2/3rds of the page and about 1-1/2 
inches from the bottom there was a line under which there was small text that 
contained contact information.  These were color images using Quark and 
printed on a Epson 1280.  They looked excellent....a very professional 
presentation. 

Currently I need to prepare a small light weight presentation to be sent to 
Europe. I would like to do something similar.  However the only way I have 
been able to figure out how to do it with Piezo prints is to make a page with 
the text and then tip the trimmed piezo image onto the page.  Am I missing 
something? Or is there a way to do this?

Billie


[Non-text portions of this message have been removed]

At 08:43 AM 8/23/01 -0400, you wrote:
>  For example, I recently saw a PR portfolio box with a number of
>sheets each with an image on the top 2/3rds of the page and about 1-1/2
>inches from the bottom there was a line under which there was small text that
>contained contact information.  These were color images using Quark and
>printed on a Epson 1280.  They looked excellent....a very professional
>presentation.
>
>Currently I need to prepare a small light weight presentation to be sent to
>Europe. I would like to do something similar.  However the only way I have
>been able to figure out how to do it with Piezo prints is to make a page with
>the text and then tip the trimmed piezo image onto the page.  Am I missing
>something? Or is there a way to do this?
>
>Billie

Why not just use the Text feature in Photoshop to add text under your 
photo.  I do it all the time and it works fine with Piezography.

Tina


Tina Manley, ASMP
http://www.tinamanley.com


[Non-text portions of this message have been removed]

Another way is to increase the canvas size of the print, positioning the
print at the top of the 'mosaic' in the dialogue box, and then to use the
type tool in the bottom third of the new canvas size.

Julian
----- Original Message -----
From: <BMercerTX@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Thursday, August 23, 2001 2:43 PM
Subject: Re: [Digital BW] Re: Using Epson Driver and Cone Inks


> Bernd,
> I know that there are "directions" for adjusting the placement of an image
> with the Piezo driver at the Piezo site, but it isn't the same as being
able
> to place and image exactly where you want it on a page with a line or two
of
> Text below.  For example, I recently saw a PR portfolio box with a number
of
> sheets each with an image on the top 2/3rds of the page and about 1-1/2
> inches from the bottom there was a line under which there was small text
that
> contained contact information.  These were color images using Quark and
> printed on a Epson 1280.  They looked excellent....a very professional
> presentation.
>
> Currently I need to prepare a small light weight presentation to be sent
to
> Europe. I would like to do something similar.  However the only way I have
> been able to figure out how to do it with Piezo prints is to make a page
with
> the text and then tip the trimmed piezo image onto the page.  Am I missing
> something? Or is there a way to do this?
>
> Billie
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Julian & Tina,
I understand that I can do this with one image and text, but what if one 
wants to do a layout with two images on a page
Top 1/2: Image to left, text right
Bottom 1/2: image right, text left
More margin on left than right for binding?

Billie



[Non-text portions of this message have been removed]

Ok...
Open a 2 windows with the  image in at the size that you want them  to be.
Increase the canvas size to the size of paper you want to print in one image
with the mosaic tile selected to top left. Use the outline tool to select
the place where you want the other image to be. Cut n paste that image into
the enlarged document. Select where the text should be, use tre type tool.
Flatten the image. I'm no expert so there may be a neater way, but this is
how I do my photo cards.

Julian
----- Original Message -----
From: <BMercerTX@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Thursday, August 23, 2001 3:21 PM
Subject: Re: [Digital BW] Re: Using Epson Driver and Cone Inks


> Julian & Tina,
> I understand that I can do this with one image and text, but what if one
> wants to do a layout with two images on a page
> Top 1/2: Image to left, text right
> Bottom 1/2: image right, text left
> More margin on left than right for binding?
>
> Billie
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

At 09:21 AM 8/23/01 -0400, you wrote:
>Julian & Tina,
>I understand that I can do this with one image and text, but what if one
>wants to do a layout with two images on a page
>Top 1/2: Image to left, text right
>Bottom 1/2: image right, text left
>More margin on left than right for binding?
>
>Billie


Billie -

You can set up any size canvas you want (File > New) and move the photos 
and text anywhere on the canvas.  Just be sure the canvas and your photos 
are the same resolution.   On the photos Select > ALL and use the move tool 
to move the photo onto the canvas (Show Grid helps to locate it).  Use the 
Text tool to add type wherever you want it.  It's really easy to do.  Keep 
everything in Layers until you get it just how you want it and then flatten 
the image.

Tina


Tina Manley, ASMP
http://www.tinamanley.com


[Non-text portions of this message have been removed]

I knew there must be an easier way!

Julian
----- Original Message -----
From: "Tina Manley" <images@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Thursday, August 23, 2001 3:37 PM
Subject: Re: [Digital BW] Re: Using Epson Driver and Cone Inks


> At 09:21 AM 8/23/01 -0400, you wrote:
> >Julian & Tina,
> >I understand that I can do this with one image and text, but what if one
> >wants to do a layout with two images on a page
> >Top 1/2: Image to left, text right
> >Bottom 1/2: image right, text left
> >More margin on left than right for binding?
> >
> >Billie
>
>
> Billie -
>
> You can set up any size canvas you want (File > New) and move the photos
> and text anywhere on the canvas.  Just be sure the canvas and your photos
> are the same resolution.   On the photos Select > ALL and use the move
tool
> to move the photo onto the canvas (Show Grid helps to locate it).  Use the
> Text tool to add type wherever you want it.  It's really easy to do.  Keep
> everything in Layers until you get it just how you want it and then
flatten
> the image.
>
> Tina
>
>
> Tina Manley, ASMP
> http://www.tinamanley.com
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Tina & Julian,
Thanks, I'll give it a try.
Billie


[Non-text portions of this message have been removed]

I just ran through 6 posts titled"using the Epson Driver and Cone Inks"
Not one had anything to do with drivers or inks!!!!!!!!
No wonder its impossible to find anything in the archives of list like this..
Steve M.

Yet another plea to follow the posting protocols with regards to 
changing the Subject line of your messages as the thread topic shifts!

Please go to "Files" > "List Related Matters" > "Posting Protocols"

Everyone's cooperation will be greatly appreciated by all.

Martin Wesley


 --- In DigitalBlackandWhiteThePrint@y..., sdmey4@a... wrote:
> I just ran through 6 posts titled"using the Epson Driver and Cone 
Inks"
> Not one had anything to do with drivers or inks!!!!!!!!

Neither did yours Steve! <<<G>>>

> No wonder its impossible to find anything in the archives of list 
like this..
> Steve M.

See what I mean, I go and ask everyone to be more careful about 
updating subject lines in threads that are drifting in topic. Then 
what do I do? I forget to change the subject line.

I truly feel sorry for anyone trying to do a search on Using Epson 
Driver and Cone Ink.

Apologies and promises to try harder,

Martin Wesley


--- In DigitalBlackandWhiteThePrint@y..., "Martin Wesley" 
<mwesley250@e...> wrote:
> Yet another plea to follow the posting protocols with regards to 
> changing the Subject line of your messages as the thread topic 
shifts!

> 
> Please go to "Files" > "List Related Matters" > "Posting Protocols"
> 
> Everyone's cooperation will be greatly appreciated by all.
> 
> Martin Wesley
> 
> 
>  --- In DigitalBlackandWhiteThePrint@y..., sdmey4@a... wrote:
> > I just ran through 6 posts titled"using the Epson Driver and Cone 
> Inks"
> > Not one had anything to do with drivers or inks!!!!!!!!
> 
> Neither did yours Steve! <<<G>>>
> 
> > No wonder its impossible to find anything in the archives of list 
> like this..
> > Steve M.