Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

margin problems

margin problems

2003-10-19 by gdicrocco

My Epson 2200 does not like to center the image on a page. I am generally printing 
with the Epson 2200 Standard profile (tried both USB and Firewire), US Letter setting.

 I set up my page to center the image. In my latest test, I used Ilford Smooth Pearl on 
the Semi-gloss setting. Generally, the long side of the image is centered, but the 
short sides are usually off by a half inch or so. I have made prints in the past that 
were centered, but it seems to be a random act of good luck. I load my paper in the 
feeder, always the same, butted up to the right.

Thanks for your help.

Glen DiCrocco

Re: [Digital BW] margin problems

2003-10-19 by Steve Kale

Try using the No Margins driver ­ I find that it then centres perfectly

Cheers 

Steve
Show quoted textHide quoted text
From: "gdicrocco" <gdicrocco@...>
Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
Date: Sun, 19 Oct 2003 20:47:19 -0000
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] margin problems

My Epson 2200 does not like to center the image on a page. I am generally
printing 
with the Epson 2200 Standard profile (tried both USB and Firewire), US
Letter setting.

 I set up my page to center the image. In my latest test, I used Ilford
Smooth Pearl on 
the Semi-gloss setting. Generally, the long side of the image is centered,
but the 
short sides are usually off by a half inch or so. I have made prints in the
past that 
were centered, but it seems to be a random act of good luck. I load my paper
in the 
feeder, always the same, butted up to the right.

Thanks for your help.

Glen DiCrocco


Yahoo! Groups Sponsor
 
 ADVERTISEMENT
 <http://rd.yahoo.com/M=251812.4052765.5265175.1261774/D=egroupweb/S=1705019
182:HM/A=1754451/R=0/SIG=11tfoi6qi/*http://www.netflix.com/Default?mqso=6017
8323&partid=4052765>

Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- Include your full name with your message.
- Include the address of your website, if you have one.
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- As the topic of a thread changes remember to change the subject header.
- Good manners are required at all time. No personal attacks or flames
- Complete your Yahoo profile.
- Before posting a question, search the message archives and the various
resources on the homepage.




Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]

Re: [Digital BW] margin problems

2003-10-19 by gdicrocco

Steve, thanks. Are you talking about the Minimize Margins driver, or Border=
less? 
Where is the "No Margins" driver?

glen


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@=
b...> 
wrote:
> Try using the No Margins driver ­ I find that it then centres perfectly
> 
> Cheers 
> 
> Steve
> 
> 
> From: "gdicrocco" <gdicrocco@e...>
> Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Date: Sun, 19 Oct 2003 20:47:19 -0000
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] margin problems
> 
> My Epson 2200 does not like to center the image on a page. I am generally=

> printing 
> with the Epson 2200 Standard profile (tried both USB and Firewire), US
> Letter setting.
> 
>  I set up my page to center the image. In my latest test, I used Ilford
> Smooth Pearl on 
> the Semi-gloss setting. Generally, the long side of the image is centered=
,
> but the 
> short sides are usually off by a half inch or so. I have made prints in t=
he
> past that 
> were centered, but it seems to be a random act of good luck. I load my pa=
per
Show quoted textHide quoted text
> in the 
> feeder, always the same, butted up to the right.
> 
> Thanks for your help.
> 
> Glen 
>

Re: [Digital BW] margin problems

2003-10-20 by Steve Kale

Glen

When you install the driver make sure you install ³All² rather than just
³Standard².  I am using the Epson 2100 driver so there may be slight word
differences but if I do this I can select Stylus Photo 2100(No Margins) as
my printer (vs Epson Stylus 2100 ­ the standard one ­ or Epson Stylus
2100(Maximum) etc ).  I suspect from what you have written below that the
equivalent for you is Borderless.  Hope this helps.

:-)
Show quoted textHide quoted text
From: "gdicrocco" <gdicrocco@...>
Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
Date: Sun, 19 Oct 2003 23:12:42 -0000
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] margin problems

Steve, thanks. Are you talking about the Minimize Margins driver, or Border=
less? 
Where is the "No Margins" driver?

glen


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@=
b...> 
wrote:
> Try using the No Margins driver ­ I find that it then centres perfectly
> 
> Cheers 
> 
> Steve
> 
> 
> From: "gdicrocco" <gdicrocco@e...>
> Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Date: Sun, 19 Oct 2003 20:47:19 -0000
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] margin problems
> 
> My Epson 2200 does not like to center the image on a page. I am generally=

> printing 
> with the Epson 2200 Standard profile (tried both USB and Firewire), US
> Letter setting.
> 
>  I set up my page to center the image. In my latest test, I used Ilford
> Smooth Pearl on 
> the Semi-gloss setting. Generally, the long side of the image is centered=
,
> but the 
> short sides are usually off by a half inch or so. I have made prints in t=
he
> past that 
> were centered, but it seems to be a random act of good luck. I load my pa=
per
> in the 
> feeder, always the same, butted up to the right.
> 
> Thanks for your help.
> 
> Glen 
> 



Yahoo! Groups Sponsor
 
 ADVERTISEMENT
 <http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=1705019
182:HM/A=1595054/R=0/SIG=124ukap9t/*http://ashnin.com/clk/muryutaitakenattog
yo?YH=3707890&yhad=1595054>

Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- Include your full name with your message.
- Include the address of your website, if you have one.
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- As the topic of a thread changes remember to change the subject header.
- Good manners are required at all time. No personal attacks or flames
- Complete your Yahoo profile.
- Before posting a question, search the message archives and the various
resources on the homepage.




Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.