Digital BW, The Print

What kind of printer do you have??  That'll help :)

John

  ----- Original Message ----- 
  From: jerdiakiw 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Sunday, November 30, 2003 11:31 AM
  Subject: [Digital BW] anyone help me move the ink carriage


  really frustrated here . anyone help me move the ink carriage ?   
  can't install inks because ink lid can't open because it is too far 
  to the right. I guess I have a lemon right out of the box. once on, 
  the power switch won't turn off without pulling the plug. will have 
  to call in AM for technical support unless  someone has a quick fix. 
  Any ideas?

  jerry

[Non-text portions of this message have been removed]

-i have a brand new 2200 just out of box and I am hoping to print bw

-- In DigitalBlackandWhiteThePrint@yahoogroups.com, "John Stacy" 
<stacyj@j...> wrote:
> What kind of printer do you have??  That'll help :)
> 
> John
> 
>   ----- Original Message ----- 
>   From: jerdiakiw 
>   To: DigitalBlackandWhiteThePrint@yahoogroups.com 
>   Sent: Sunday, November 30, 2003 11:31 AM
>   Subject: [Digital BW] anyone help me move the ink carriage
> 
> 
>   really frustrated here . anyone help me move the ink 
carriage ?   
>   can't install inks because ink lid can't open because it is too 
far 
>   to the right. I guess I have a lemon right out of the box. once 
on, 
>   the power switch won't turn off without pulling the plug. will 
have 
>   to call in AM for technical support unless  someone has a quick 
fix. 

>   Any ideas?
> 
>   jerry
> 
> [Non-text portions of this message have been removed]

Ok, what does the manual say about changing the cartridges??  Some printers have a separate button to push to move the carts, others use a combination of power/feed, etc.  I'm not familiar with the 2200, but it should explain it in the manual???  (Well, I'm still looking at the obvious here, so if you've tried, let me know. :)

John

  ----- Original Message ----- 
  From: jerdiakiw 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Sunday, November 30, 2003 11:49 AM
  Subject: Re: [Digital BW] anyone help me move the ink carriage


  -i have a brand new 2200 just out of box and I am hoping to print bw

  -- In DigitalBlackandWhiteThePrint@yahoogroups.com, "John Stacy" 
  <stacyj@j...> wrote:
  > What kind of printer do you have??  That'll help :)
  > 
  > John

[Non-text portions of this message have been removed]

One of my printers required that I hold the ink button down for several 
seconds.  That is what I was doing with the 2200.  The ink carrier would take off 
and move around but it would not stay out where I could open the top to put in 
cartridges. I was trying everything to get the ink carrier to stay out so I 
could switch out the black ink from photo to matte. I was so frustrated.  
Finally someone told me not to hold the button down, just tap and that did it. That 
is very simplistic but maybe it will help.     
Billie


[Non-text portions of this message have been removed]