Yahoo Groups archive
Thread
2003-12-23 by ricm95901
One of our 3000s was printing fine and then all of a sudden after spitting out a print it shut down with the "ink out lights" flashing and the other panel lights on. I tried the reset button, unplugged the AC/cable, etc. I think I read about this problem many months ago but can't seem to find anything in the archives. Can anyone lend a hand?!?! Thanks - Rick Murai
2003-12-23 by ricm95901
Found the fix! Thanks Tyler:
>This is to force a sevice visit to empty the waste ink pads. You can >do a hard reset- > >Hold down the three buttons - [Pause] & [LF/FF] & [micro adj DOWN >arrow] - together and then turn on the printer. > Hold the three buttons until all the panel lights flash and then you >can let go. >Courtesy of an old Bill Bergh post. >Don't do this too many time without an internal cleaning or ink may >overflow internally, I've done it 3 or 4 times with no disasters. >Tyler