Re: [Digital BW] Priming the cartridges on a used CIS for a 1160?
2002-02-01 by Jerry Olson
Don't vacuum. Just insert a syringe into the bottle cap center tube with the correct ink you want to fill the tube with and fill til the air is gone. Jerry steven0356 wrote:
Show quoted textHide quoted text
> > I am getting ready to install a used CIS (nomorecarts.com) in to a > Epson 1160. There is still ink in the lines and the end of the tubes > have been bent over and taped off. > > Do you think I should try and vacuum pump any air out of the line > even though there is ink in the lines or is there away to vent any > trapped air later? > > Thanks > > Steve > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or "flames." > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the various resources on the homepage. > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/