Doepfer

Ingo,

thank you. You are right. Only 128 and 4096 stages are affected.

Dieter

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von selfoscillate
> Gesendet: Mittwoch, 26. April 2006 12:40
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: A-188-1 with 128 and 4096 stages
>
>
>
> hello all,
>
> it seems that dieter's message had a little typo in
> the first part. modifications on the first and second series of
> bbd-modules are only necessary for 128 and 4096 stages ic's.
> 256 stages modules do not need any modification.
>
> best wishes
>
> ingo
>
>
>
> --- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" <hardware@...>
> wrote:
> >
> > Because we had some inquiries I have to point out that it is not
> possible to
> > order a modified module of the first two series and exchange it
> later for a
> > non-modified module from the third series (~June 2006). If you want
> to have
> > an A-188-1 with  128, 256 or 4096 stages without the "DIY
> modification" I
> > ask you to wait until June. Please refer to my message from April
> 11, 2006.
> > Same as for the A-188-1 with 4096 stages (MN3005) applies to the A-
> 188-1
> > with 128 stages (MN3006)! Only the modules with 256, 512, 1024 and
> 2048
> > stages can be manufactured without that ugly DIY mods.
> >
> > Best wishes
> > Dieter Doepfer
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Doepfer_a100@yahoogroups.com
> > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von vliesgaard
> > > Gesendet: Mittwoch, 26. April 2006 07:37
> > > An: Doepfer_a100@yahoogroups.com
> > > Betreff: [Doepfer_a100] Re: A-113 input sencetivity/tracking
> problems
> > >
> > >
> > > --- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" <hardware@>
> > > wrote:
> > > >
> > > > Dirk,
> > > >
> > > > does this problem occur with the A-111 only or even with A-110?
> And
> > > are you
> > > > sure that you shortened C10 (not C9, C9 is responsible for AC
> > > coupling of
> > > > the sawtooth) ?
> > > >
> > > > Best wishes
> > > > Dieter Doepfer
> > > >
> > >
> > > Hi,
> > >
> > > It only occurs with the A-111 pulse output.
> > > I don't have a A-110, but the A-113 works as expected with Roland
> > > System 100 vco's, Analoge Systems vco's/lfo's and the pulse
> output of
> > > the A-154 sequenser controler.
> > >
> > > I shorted both C's, just to make sure, and it helps a lot.
> > > But the A-113 still has problems tracking low frequenty's.
> > >
> > > Greetings Dirk.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>