Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] one more idea...

2006-05-09 by Bakis Sirros

hello florian,
ok, but,
what special feature this "cv interface module for
tape machines with cv control of tape speed" would
offer? i mean that any cv source of the a100 can be
connected with a cv input of a tape machine that has
cv inputs (i used that with my korg stage echo se500
that has cv input for tape speed and works fine. it is
a standard +5 to -5 volts cv input anyway).
regards,
Bakis.



--- Florian Anwander <Florian.Anwander@consol.de>
wrote:

> Hi Bakis
> 
> > would something like this be doable dieter?
> I am not Dieter, but let me jump in here: I
> experimented a lot with tape 
> based delays and tried also something similar with
> modified cassette 
> players.
> Result: Forget it as a module. Forget cassettes. I
> think Dieter does not 
> want to reinvent the videotape mechanism for
> audiotapes. 
> Cartdrige-drives (which might make it a little bit
> easier) are closed to 
> unknown and unavailable here in Europe (at least I
> have never seen them 
> here).
> 
> What might be interesting: an CV-interface for well
> known tape decks 
> like a Revox B77 or PR99. These already have
> Control-Inputs for the 
> capstan speed, which should be easy to be interfaced
> with the A100.
> 
> 
> Florian
> 
> > 
> > 
> > 
> > 
> > --- david rothbaum <david@davidrothbaum.com>
> wrote:
> > 
> > 
> >>cv tape echo module.
> >>
> >>perhaps you could do this with a tape cartridge
> that
> >>would be front
> >>loaded on the panel. or maybe use a standard
> >>cassette tape mechanism
> >>and use "looping" cassettes as the cartridges.
> >>(these are pretty cheap
> >>and there are lots of different lengths, from 10
> >>seconds to 20
> >>minutes). then have cv control over feedback, echo
> &
> >>tape speed. then
> >>also have a "sound on sound" loop record mode
> where
> >>you could have a
> >>gate signal trigger the record function on/off.
> >>also, and i am not
> >>sure if this is possible (and definitely not if
> you
> >>were to use the
> >>"looping" cassettes"), but it would be cool to
> have
> >>the ability to
> >>reverse the tape as well and have the direction
> >>controlled via cv with
> >>a gate signal.
> >>
> >>--david
> >>
> >>
> >>
> >>
> >>
> > 
> > 
> > 
> > Bakis Sirros - Parallel Worlds
> > [Doepfer_a100] group owner
> > http://www.parallel-worlds-music.com
> > http://www.myspace.com/parallelworldsmusic
> > http://www.shimarecords.co.uk
> > http://www.rubber.gr
> > Athens-Greece
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> > http://mail.yahoo.com 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> 
> -- 
> Florian Anwander                  |ConSol
> Tel.   +49(89)45841-133          
> |Consulting&Solutions Software GmbH
> Fax    +49(89)45841-111           |Franziskanerstr.
> 38, D-81669 München
> email: florian.anwander@consol.de
> |http://www.consol.de
> 
> 


Bakis Sirros - Parallel Worlds
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.