Doepfer

Yes, and maybe the address and clock signals of the "old" A-155 controller
that is used if the A-155 runs without A-154. The expansion module would
have these sockets available:

A0 In A-155
A1 In A-155
A2 In A-155
Clock In A-155

A0 Out A-154
A1 Out A-154
A2 Out A-154
Clock Out A-154

A0 Out A-155 (controller board of A-155)
A1 Out A-154 (controller board of A-155)
A2 Out A-154 (controller board of A-155)
Clock Out A-154 (controller board of A-155)

It's very simple to built this "module" as an DIY project (no electronics
necessary, only wiring of the sockets to certain terminals of the pc
boards).

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Bakis Sirros
> Gesendet: Montag, 15. Mai 2006 19:44
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: AW: [Doepfer_a100] any more ideas for exotic future A100
> modules? -> Modular Sequencing System
>
>
> hello dieter,
> so, this would be a poll about an "expansion" module
> that would bring the a0,a1,a2 addresses of the a155 to
> the front panel as inputs and the a0,a1,a2 addresses
> of the a155 clock and a154 clock as outputs?(does this
> ssentence makes sense? i am not an electronics
> engineer)
> please confirm.
> best regards,
> Bakis.
>
>
>
> --- Dieter Doepfer <hardware@doepfer.de> wrote:
>
> > > hello florian, dieter,
> > > so, taking into account the recent email from
> > dieter
> > > telling how he could make an expansion module to
> > brign
> > > the a0,a1,a2,a3 addresses of the a154 and a155
> > clock
> > > to the front panel, should i, or should i not,
> > create
> > > a new poll about a modular sequencer?
> > > regards,
> > > Bakis.
> >
> > For the moment I'd recommend a poll concerning an
> > additional front panel
> > that makes available the address and clock
> > in/outputs of A-154 and A-155 as
> > this could be realized within a short time provided
> > that there are
> > sufficient inquiries (because of the initial charges
> > for the pcb and front
> > panel). Another solution would be a corresponding
> > note on the DIY page if
> > there are not sufficient inquiries. It's no
> > electronic but only mechanics
> > (drilling holes into blind panels, screwing sockets
> > to the holes) and wiring
> > the sockets to the ribbon cables that are normally
> > used to connect A-154 and
> > A-155.
> >
> > Best wishes
> > Dieter Doepfer
> >
> > P.S. We added a note on the DIY page how to modify
> > the Wasp filter A-124 for
> > self-oscillation.
> >
> >
>
>
> Bakis Sirros - Parallel Worlds
> [Doepfer_a100] group owner
> http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>