Doepfer

If hooked up correctly: No. Only diff. is that those modules are no
longer connected to the gate and cv signals on the bus board.

--- In Doepfer_a100@yahoogroups.com, "jeswa" <j@...> wrote:
>
> The Analogue Haven description for the 16 pin to 16 pin cable reads:
> 
> "Make sure that the module in question uses all 16-pins on the PCB 
> side (such as the A-110, A-111, A-140, A-142 and others)"
> 
> Is there any harm in using these cables with a 10 pin bus connector, 
> assuming it's hooked up corectly?
>