Doepfer

When mounting a Doepfer bus board in a "generic" eurorack case I came upon
a  similar problem (I think Doepfer uses individual nuts for mounting bus
boards whereas this case came with a rail). I snapped the rail in halves,
then removed a hole or two more and now it all fits. Whether you would do
that with rails for module mounting is a different matter, though, as you
may want to have some flexibility in rearranging your modules and breaking
the rails in halves may result in some trouble when reorganizing later.

/Silas

On 9/5/07, James Husted <the_ersatz_planet@mac.com> wrote:
>
>   I have both Doepfer and AS in my 2 portable rack cabinets (which are
> VERY nice units BTW) and there is a spacing difference in the two
> manufacturers - it is equal to half the space between two screw holes
> in the rails. All this will result in is a gap between the set of AS
> modules and the Doepfer ones of half the space between two rail holes
> - not very much. I have to admit that I went to the effort of
> drilling new holes on my AS modules to compensate (I'm sorta anal
> about it though). As long as you keep the AS modules together there
> will only be the gap between them and the Doepfer modules (not
> between the AS modules themselves)
>
> -James
>
> On Sep 4, 2007, at 2:41 PM, funkycholrton wrote:
>
> > Hi
> >
> > I have a s6U ystem which is about half doepfer and the rest is
> > analogue systems and analogue solutions. at the moment I have it in a
> > homebrew wooden case with wooden rails.
> >
> > If I moved the whole thing into a doepfer suitcase would I have
> > trouble combining the other modules with Doepfer in the same row? It
> > seems the hole spacing might be different??
> >
> > I am wondering how people get around this?
> >
> > Richard
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>  
>


[Non-text portions of this message have been removed]