Doepfer

> I have both Doepfer and AS in my 2 portable rack cabinets (which are
> VERY nice units BTW) and there is a spacing difference in the two
> manufacturers - it is equal to half the space between two screw holes
> in the rails. All this will result in is a gap between the set of AS
> modules and the Doepfer ones of half the space between two rail holes
> - not very much. I have to admit that I went to the effort of
> drilling new holes on my AS modules to compensate (I'm sorta anal
> about it though). As long as you keep the AS modules together there
> will only be the gap between them and the Doepfer modules (not
> between the AS modules themselves)
>
> -James

If you send me a dimensional drawing I could ask our front panel
manufacturer to produce a blind panel ( "1.5 TE" or so) to compensate the
gap. It would be cheap (~ Euro 2...3) provided that we obtain sufficient
pre-orders (min. 50, otherwise the price will increase because of the
non-recurring machine programming charges).

Best wishes
Dieter Doepfer

Bakis - how about a poll (including the option "would you buy such a
compensation panel if it's in the Euro 2...3 range)