Doepfer

Sorry, I'm confused -- you're saying that the A-100AD5 will only permit one
5V module in the row in which it's installed?

--Chuck

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On
Behalf Of hardware@doepfer.de
Sent: Friday, December 14, 2007 10:12 AM
To: Doepfer_a100@yahoogroups.com
Subject: AW: [Doepfer_a100] 5V Low-Cost Adapter questions

> I have two 5V Low-Cost Adapters (A-100AD5). I have previously used them
> with A-113 and A-190 installed in separate A-100G6 cabinets.
>
> Now I am going to put A-113 and A-190 into same cabinet. Looking at the
> power consumption figures it appears, that two A-100AD5 are still
> needed. Just to make to make sure, I would like to ask, how should the
> A-100AD5:s be installed, when
> - A-113 and A-190 are in the same row/power rail.

Sorry, that's not possible as only one A-100AD5 is allowed for each bus
board.

> - A-113 and A-190 are in different rows.

That's the right solution. Simple connect one A-100AD5 on each bus board.

Best wishes
Dieter Doepfer