Doepfer

If you wanna trade a 190 for a 110 just tell me so. I wanna go that way =)


----- Original Message -----
From: "buechlerjoe" <buechlerjoe@toadmail.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Sunday, April 28, 2002 3:56 PM
Subject: [Doepfer_a100] Re: Experience using MCV4 with A100?


> Thanks for the information, keld. Instead of using the mod wheel, is
> it possible to set the MCV4's bend range to zero, and pick up the
> pitch bender CV from one of the assignable jacks instead?
>
> It's kind of a bummer anyway, because my slew limiter tends to get
> used up already, smoothing out the 8-bit zippering from the A190/191.
>
> Perhaps I'm being foolish. If I added up all of the money that I'd
> end up having invested in the A190, A191, and MCV4, maybe the MCV24
> isn't looking so expensive. I'd get my slew limiter back. I could
> also use the MCV24's software envelopes instead of limping along with
> only one ADSR for the second voice. Replacing the A190/191 would also
> "buy back" 22U of A100 frame space, which I could use for other
> things, like maybe to add another VCO, mixer, and VCA.
>
> I'll have to think about this some more. Comments are welcome.
>
> Joe
>
> --- In Doepfer_a100@y..., "studio1dk" <keld.soerensen1@s...> wrote:
> > I´m using the MCV4 with my A-100. It works Ok but if you use the
> > pitch-bend you´ll hear small "steps" and not a gliding tone
> > (quanticed). I use the mod-wheel patched through the slew limiter
> and
> > get the bending there.
> >
> > keld
> >
> > --- In Doepfer_a100@y..., "buechlerjoe" <buechlerjoe@t...> wrote:
> > > I'd like to have an extra Midi channel for occasional duophonic
> > > operation of my A100. I can drive the A100 from two different
> > > Regelwerk tracks using the CV outputs, but I'd like to be able to
> > run
> > > it that way from a Midi sequencer also.
> > >
> > > I don't need all of the channels and outputs of the MCV24, and
> > don't
> > > want to pay the price. Has anyone used the MCV4 for this purpose?
> > Are
> > > there any problems with this arrangement? Are there other
> solutions
> > > that I should also be considering?
> > >
> > > Thanks
> > >
> > > Joe
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>