Doepfer

i accidently deleted a reply to this post from Bakis, i believe he said an easy fix was to use a VCA after the phase shifter...

i don't consider that a fix, i consider that a work-around...to fix the problem would be to reduce the noise level, not hide it...depending on the source material, that may or may not be an appropriate solution....


rg


----- Original Message ----
From: astroschnautzer <astroschnautzer@yahoo.com>
To: Doepfer_a100@yahoogroups.com
Sent: Saturday, February 23, 2008 8:46:52 AM
Subject: [Doepfer_a100] A-125 phaser (noise issue)

I just got this module ,seems to work ok besides its terribly noisy. My soundcards noisefloor 
is at about -90db withoout this plugged in whe i plug it in it shows -47db so over 40 db of 
noise... Is this normal for this module or should I send it back?




[Non-text portions of this message have been removed]