Doepfer

My A-199 has an awful buzz, i've tried moving it as far away from
the PSU as possible, there's still a buzz, its pretty much useless
at this point because its so bad.  So for the Mu-Metal Foil, if you
were to get some of this, where would you put it on the module? 
would you just wrap the RCA cord in it?  Thanks! Jon


--- In Doepfer_a100@yahoogroups.com, "thomasborax" <thomasborax@...>
wrote:
>
> ernst-
> as it happened, i never tried the mu metal.  i didn't find the price 
> prohibitive, since it only required 20$ to do the job, and i did find 
> that goofy sheilding company kinda charming, but i did something else 
> which turned out pretty easy.
> 
> i drilled a hole through the wood strip across the bottom of the 
> front panel, cut the rca cable coming from the pc board halfway 
> between the board and the jacks, threaded the remaining lenth of 
> cable through the hole, screwed the module in, and soldered the jack-
> end of the cable back onto the rest of the cable.  whenever i pack up 
> the suitcase for a gig, i just unplug the tank (which sits wherever 
> away from the psu) and tuck the cable in along with my patch mess and 
> close the door.
> 
> doesn't answer your question, but if i recall correctly you already 
> drilled mults in your wood strip, so you probably wouldn't find 
> another hole sacrelige.
> 
> ok-tom
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "Ernst Karel" <eklkrl@g...> 
> wrote:
> >
> > 
> > Can anyone report on having tried this mu-metal in a suitcase with 
> the old power supply?  
> > Does it completely eliminate the hum?
> > 
> > thanks,
> > Ernst
> > 
> > --- In Doepfer_a100@yahoogroups.com, "thomasborax" 
> <thomasborax@y...> wrote:
> > >
> > > 
> > > hello-
> > > great link.  thx!  expensive yes, though the amount needed is 
> > > small...who can put a value on a wild reverb sound?
> > > --t
> > > 
> > > 
> > > > Hi Dieter and group
> > > > 
> > > > In English is know as mu-metal, and very expensive, you can get 
> some
> > > > of them here:
> > > > http://www.lessemf.com/
> > > > 
> > > > Best Regards,
> > > > 
> > > > Josue.
> >
>