Doepfer

Oh and I should also say that i'm using an Accutronics
Spring, and its mounted outside my case......tried
testing the module with the doepfer spring and it 
still does the same thing......so I guess I should
also ask as far as the MU-METAL goes, do you wrap
the Spring Tank in it?


--- In Doepfer_a100@yahoogroups.com, "swordsect" <asher.jonas@...> wrote:
>
> My A-199 has an awful buzz, i've tried moving it as far away from
> the PSU as possible, there's still a buzz, its pretty much useless
> at this point because its so bad.  So for the Mu-Metal Foil, if you
> were to get some of this, where would you put it on the module? 
> would you just wrap the RCA cord in it?  Thanks! Jon
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "thomasborax" <thomasborax@>
> wrote:
> >
> > ernst-
> > as it happened, i never tried the mu metal.  i didn't find the price 
> > prohibitive, since it only required 20$ to do the job, and i did find 
> > that goofy sheilding company kinda charming, but i did something else 
> > which turned out pretty easy.
> > 
> > i drilled a hole through the wood strip across the bottom of the 
> > front panel, cut the rca cable coming from the pc board halfway 
> > between the board and the jacks, threaded the remaining lenth of 
> > cable through the hole, screwed the module in, and soldered the jack-
> > end of the cable back onto the rest of the cable.  whenever i pack up 
> > the suitcase for a gig, i just unplug the tank (which sits wherever 
> > away from the psu) and tuck the cable in along with my patch mess and 
> > close the door.
> > 
> > doesn't answer your question, but if i recall correctly you already 
> > drilled mults in your wood strip, so you probably wouldn't find 
> > another hole sacrelige.
> > 
> > ok-tom
> > 
> > 
> > --- In Doepfer_a100@yahoogroups.com, "Ernst Karel" <eklkrl@g...> 
> > wrote:
> > >
> > > 
> > > Can anyone report on having tried this mu-metal in a suitcase with 
> > the old power supply?  
> > > Does it completely eliminate the hum?
> > > 
> > > thanks,
> > > Ernst
> > > 
> > > --- In Doepfer_a100@yahoogroups.com, "thomasborax" 
> > <thomasborax@y...> wrote:
> > > >
> > > > 
> > > > hello-
> > > > great link.  thx!  expensive yes, though the amount needed is 
> > > > small...who can put a value on a wild reverb sound?
> > > > --t
> > > > 
> > > > 
> > > > > Hi Dieter and group
> > > > > 
> > > > > In English is know as mu-metal, and very expensive, you can get 
> > some
> > > > > of them here:
> > > > > http://www.lessemf.com/
> > > > > 
> > > > > Best Regards,
> > > > > 
> > > > > Josue.
> > >
> >
>