Doepfer

Dieter,

Thank you for looking into the USA power supply matter and getting 
some resolution!  Your swift response to this issue helps renew my 
faith in Doepfer, and hopefully will solve the issues that have been 
reported in various forums with both DIY kits.

Thank you again,

Henfield..................
--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> I got an answer from Shawn Cleary from Analogue Haven concerning the
> transformers and power supplies for A-100 DIY#1 and #2.
> 
> So far they found only a suitable transformer with 1100mA for A-
100DIY#1.
> That's why the A-100DIY#1 in USA were delivered with an 1100mA 
transformer
> only. But we browsed throug some online shops and found a 
transformer with
> 4000mA (4A) which is  more than sufficient for the A-100DIY#1 
(Jameco
> EHU160400E7940 16VAC/4000mA). Shawn will order these new 
transformers asap
> and deliver the A-100DIY#1 with the 4000mA transformers.
> 
> For the A-100DIY#2 it may have happened that Analogue Haven 
delivered
> unstabilized/unregulated supplies by mistake. Please look at the 
PSU you
> obtained together with the A-100DIY#2. If they are 
stabilized/regulated it
> will be mentioned on the case. Even here we found a suitable 12V
> stabilized/regulated supply (Jameco DDU120050F0981 12V/500mA).
> 
> Shawn told me that they will change to these new supplies 
immediately once
> they receive stock from Jameco.
> 
> If you have question please contact Shawn directly: shawn@...
> 
> Best wishes
> Dieter Doepfer
>