Doepfer

Can that be used to plug Doepfer modules into ASys sockets?  It looks like
it is a female ASys + female Doepfer, so it could only be used to plug ASys
into Doepfer sockets, since the ASys sockets in the RS10/15 case are female.

On Sun, Feb 15, 2009 at 3:39 AM, achtung_999 <
heinrich.himmelwasser@gmail.com> wrote:

>   I can highly recommend the Analogue Haven adapter.
>
>
> On Sun, Feb 15, 2009 at 11:39 AM, nicholas_kent <zaum@optonline.net<zaum%40optonline.net>>
> wrote:
> > --- In Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com>,
> Monroe Eskew <monroe.eskew@...> wrote:
> >>
> >> There is an adapter made by AS to fit their modules in Doepfer cases.
> >> It looks like in theory it could be used for the reverse application,
> >> fitting Doepfer modules to AS power sockets. Can someone verify that
> >> this works?
> >>
> >
> > I'm using the one I bought from from Big City Music and it's fine. I
> assume
> > it came from ASys.
> > Be extra careful to make sure everything is plugged in the correct
> > orientation and not the
> > reverse. You don't have to do anything unusual, just for instance look at
> > the -12 volt
> > connection on the module and trace it through the adapter cable to the
> -12
> > on the ASys case.
> > This is especially true of the couple Doepfer compatible brands that are
> > already easy to install
> > the wrong way.
> >
> > p.s. "AS" isn't such a good abbreviation because Analogue Solutions makes
> > all sorts of
> > Eurorack gear too. I've got an AS rack with a majority of AS sockets but
> all
> > my AS modules
> > use Doepfer sockets. So I needed to use one of these AS adaptors to
> connect
> > my AS module
> > to my AS case.
> >
> >
>
>  
>


[Non-text portions of this message have been removed]