Doepfer

Excuse me.
I had not read correctly what you wanted to do.
My bad!


On Sun, Feb 15, 2009 at 7:24 PM, Monroe Eskew <monroe.eskew@gmail.com> wrote:
> Can that be used to plug Doepfer modules into ASys sockets? It looks like
> it is a female ASys + female Doepfer, so it could only be used to plug ASys
> into Doepfer sockets, since the ASys sockets in the RS10/15 case are female.
>
> On Sun, Feb 15, 2009 at 3:39 AM, achtung_999 <
> heinrich.himmelwasser@gmail.com> wrote:
>
>> I can highly recommend the Analogue Haven adapter.
>>
>>
>> On Sun, Feb 15, 2009 at 11:39 AM, nicholas_kent
>> <zaum@optonline.net<zaum%40optonline.net>>
>> wrote:
>> > --- In Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com>,
>> Monroe Eskew <monroe.eskew@...> wrote:
>> >>
>> >> There is an adapter made by AS to fit their modules in Doepfer cases.
>> >> It looks like in theory it could be used for the reverse application,
>> >> fitting Doepfer modules to AS power sockets. Can someone verify that
>> >> this works?
>> >>
>> >
>> > I'm using the one I bought from from Big City Music and it's fine. I
>> assume
>> > it came from ASys.
>> > Be extra careful to make sure everything is plugged in the correct
>> > orientation and not the
>> > reverse. You don't have to do anything unusual, just for instance look
>> > at
>> > the -12 volt
>> > connection on the module and trace it through the adapter cable to the
>> -12
>> > on the ASys case.
>> > This is especially true of the couple Doepfer compatible brands that are
>> > already easy to install
>> > the wrong way.
>> >
>> > p.s. "AS" isn't such a good abbreviation because Analogue Solutions
>> > makes
>> > all sorts of
>> > Eurorack gear too. I've got an AS rack with a majority of AS sockets but
>> all
>> > my AS modules
>> > use Doepfer sockets. So I needed to use one of these AS adaptors to
>> connect
>> > my AS module
>> > to my AS case.
>> >
>> >
>>
>>
>>
>
> [Non-text portions of this message have been removed]
>
>