Thanks for your help, Neal, Scott and Fitz.. I'll look at that A107 and have a read. Cheers Jase Sent from my iPhone > On 12 May 2015, at 04:50, fitz fytz_72@yahoo.fr [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > just watch the A107 PDF because that's the same filters individualy . > the aim to get several output is to mix or crossing the diferents outut , for example with a A 134-2 or a A 144 and a A 135 . > Fitz > > De : "Scott Rogers scott@scottfromcanada.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> > À : Doepfer_a100@yahoogroups.com > Envoyé le : Lundi 11 mai 2015 20h23 > Objet : Re: [Doepfer_a100] A106-6 XP filter > > > The manual I got with the Basis System 2 also did not have a page for that filter. > > There is not much to know though. > > Plug something into the audio input (and turn the level up) and then take the output from one of the jacks on the right side. > > A is All Pass > H is High Pass > B is Band Pass > N is Notch > L is Low Pass > > The number is the number of poles > > 4 = 4 pole = 24db/octave > 2 = 2 poles = 12db/octave > > FCV1 is control voltage that controls the Cutoff frequency. Patch in the output of an envelope generator or any other control voltage source. > FCV2 also controls the cutoff frequency but has the attenuator knob beside it so you can control how much. > QCV controls the resonance (Q, emphasis) > > and the switch at the bottom just toggles between filter types on each of the output jacks eg: the bottom jack is either 1 pole low pass or if the switch is to the right it's 2pole low pass. > > That's about it. Go crazy. > > Scott > > > > > > At 01:20 PM 5/11/2015, you wrote: >> >> >> I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New to this so just wanted a few patch ideas to get me going like most of the other doepfer PDFs have.. Is there a pdf for another filter which you can recommend looking at at ? Cheers jase >> >> Sent from my iPhone >> >>> On 11 May 2015, at 13:32, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] < Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> >>> It doesn't work any differently to the others, the manual lists the filter types if that's what you need? >>> >>> Neil >>> >>> Sent from my iPhone >>> >>>> On 11 May 2015, at 09:47, sachavaughan@yahoo.com [Doepfer_a100] < Doepfer_a100@yahoogroups.com> wrote: >>>> >>>> >>>> >>>> Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they? >>>> >>>> >>>> Cheers Jase > > > >
Message
Re: [Doepfer_a100] A106-6 XP filter
2015-05-12 by Jase
Attachments
- No local attachments were found for this message.