A106-6 XP filter
2015-05-11 by sachavaughan@yahoo.com
Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they?
Cheers Jase
Thread
A106-6 XP filter
Re: [Doepfer_a100] A106-6 XP filter
2015-05-11 by Neil Kagan
It doesn't work any differently to the others, the manual lists the filter types if that's what you need? Neil Sent from my iPhone
Show quoted textHide quoted text
> On 11 May 2015, at 09:47, sachavaughan@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they? > > > > Cheers Jase > >
Re: [Doepfer_a100] A106-6 XP filter
2015-05-11 by Jase
I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New to this so just wanted a few patch ideas to get me going like most of the other doepfer PDFs have.. Is there a pdf for another filter which you can recommend looking at at ? Cheers jase Sent from my iPhone
Show quoted textHide quoted text
> On 11 May 2015, at 13:32, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > It doesn't work any differently to the others, the manual lists the filter types if that's what you need? > > Neil > > Sent from my iPhone > >> On 11 May 2015, at 09:47, sachavaughan@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> >> Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they? >> >> >> >> Cheers Jase >> > >
Re: [Doepfer_a100] A106-6 XP filter
2015-05-11 by Neil Kagan
Oh right, umm I don't know.. I just tried different outputs and resonance settings. It's based on the Oberheim Xpander filter so maybe the manual for that? Neil Sent from my iPhone
Show quoted textHide quoted text
> On 11 May 2015, at 18:20, Jase sachavaughan@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New to this so just wanted a few patch ideas to get me going like most of the other doepfer PDFs have.. Is there a pdf for another filter which you can recommend looking at at ? Cheers jase > > Sent from my iPhone > >> On 11 May 2015, at 13:32, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> >> It doesn't work any differently to the others, the manual lists the filter types if that's what you need? >> >> Neil >> >> Sent from my iPhone >> >>> On 11 May 2015, at 09:47, sachavaughan@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they? >>> >>> >>> >>> Cheers Jase >>> > >
Re: [Doepfer_a100] A106-6 XP filter
2015-05-11 by Scott Rogers
The manual I got with the Basis System 2 also did not have a page for
that filter.
There is not much to know though.
Plug something into the audio input (and turn the level up) and then take the output from one of the jacks on the right side.
A is All Pass
H is High Pass
B is Band Pass
N is Notch
L is Low Pass
The number is the number of poles
4 = 4 pole = 24db/octave
2 = 2 poles = 12db/octave
FCV1 is control voltage that controls the Cutoff frequency. Patch in the output of an envelope generator or any other control voltage source.
FCV2 also controls the cutoff frequency but has the attenuator knob beside it so you can control how much.
QCV controls the resonance (Q, emphasis)
and the switch at the bottom just toggles between filter types on each of the output jacks eg: the bottom jack is either 1 pole low pass or if the switch is to the right it's 2pole low pass.
That's about it. Go crazy.
Scott
At 01:20 PM 5/11/2015, you wrote:
There is not much to know though.
Plug something into the audio input (and turn the level up) and then take the output from one of the jacks on the right side.
A is All Pass
H is High Pass
B is Band Pass
N is Notch
L is Low Pass
The number is the number of poles
4 = 4 pole = 24db/octave
2 = 2 poles = 12db/octave
FCV1 is control voltage that controls the Cutoff frequency. Patch in the output of an envelope generator or any other control voltage source.
FCV2 also controls the cutoff frequency but has the attenuator knob beside it so you can control how much.
QCV controls the resonance (Q, emphasis)
and the switch at the bottom just toggles between filter types on each of the output jacks eg: the bottom jack is either 1 pole low pass or if the switch is to the right it's 2pole low pass.
That's about it. Go crazy.
Scott
At 01:20 PM 5/11/2015, you wrote:
I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New to this so just wanted a few patch ideas to get me going like most of the other doepfer PDFs have.. Is there a pdf for another filter which you can recommend looking at at ? Cheers jase
Sent from my iPhone
Show quoted textHide quoted text
On 11 May 2015, at 13:32, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] < Doepfer_a100@yahoogroups.com> wrote:
It doesn't work any differently to the others, the manual lists the filter types if that's what you need?
Neil
Sent from my iPhone
On 11 May 2015, at 09:47, sachavaughan@yahoo.com [Doepfer_a100] < Doepfer_a100@yahoogroups.com> wrote:
Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they?
Cheers Jase
Re: [Doepfer_a100] A106-6 XP filter
2015-05-12 by fitz
just watch the A107 PDF because that's the same filters individualy .the aim to get several output is to mix or crossing the diferents outut , for example with a A 134-2 or a A 144 and a A 135 .Fitz
De : "Scott Rogers scott@scottfromcanada.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
À : Doepfer_a100@yahoogroups.com
Envoyé le : Lundi 11 mai 2015 20h23
Objet : Re: [Doepfer_a100] A106-6 XP filter
The manual I got with the Basis System 2 also did not have a page forthat filter.
There is not much to know though.
Plug something into the audio input (and turn the level up) and then takethe output from one of the jacks on the right side.
A is All Pass
H is High Pass
B is Band Pass
N is Notch
L is Low Pass
The number is the number of poles
4 = 4 pole = 24db/octave
2 = 2 poles = 12db/octave
FCV1 is control voltage that controls the Cutoff frequency. Patch in theoutput of an envelope generator or any other control voltage source.
FCV2 also controls the cutoff frequency but has the attenuator knobbeside it so you can control how much.
QCV controls the resonance (Q, emphasis)
and the switch at the bottom just toggles between filter types on each ofthe output jacks eg: the bottom jack is either 1 pole low pass or if theswitch is to the right it's 2pole low pass.
That's about it. Go crazy.
Scott
At 01:20 PM 5/11/2015, you wrote:
I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New tothis so just wanted a few patch ideas to get me going like most of theother doepfer PDFs have.. Is there a pdf for another filter which you canrecommend looking at at ? Cheers jase
Sent from my iPhone
On 11 May 2015, at 13:32, Neil Kaganblinkenlicht@yahoo.com[Doepfer_a100]<Doepfer_a100@yahoogroups.com> wrote:
It doesn't work any differently to the others, the manual lists thefilter types if that's what you need?
Neil
Sent from my iPhone
On 11 May 2015, at 09:47,sachavaughan@yahoo.com[Doepfer_a100]<Doepfer_a100@yahoogroups.com> wrote:
Hi, don't suppose anyone has any patch examples or ideas on how to usethe titled filter do they?
Cheers JaseRe: [Doepfer_a100] A106-6 XP filter
2015-05-12 by Jase
Thanks for your help, Neal, Scott and Fitz.. I'll look at that A107 and have a read. Cheers Jase Sent from my iPhone
Show quoted textHide quoted text
> On 12 May 2015, at 04:50, fitz fytz_72@yahoo.fr [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > just watch the A107 PDF because that's the same filters individualy . > the aim to get several output is to mix or crossing the diferents outut , for example with a A 134-2 or a A 144 and a A 135 . > Fitz > > De : "Scott Rogers scott@scottfromcanada.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> > À : Doepfer_a100@yahoogroups.com > Envoyé le : Lundi 11 mai 2015 20h23 > Objet : Re: [Doepfer_a100] A106-6 XP filter > > > The manual I got with the Basis System 2 also did not have a page for that filter. > > There is not much to know though. > > Plug something into the audio input (and turn the level up) and then take the output from one of the jacks on the right side. > > A is All Pass > H is High Pass > B is Band Pass > N is Notch > L is Low Pass > > The number is the number of poles > > 4 = 4 pole = 24db/octave > 2 = 2 poles = 12db/octave > > FCV1 is control voltage that controls the Cutoff frequency. Patch in the output of an envelope generator or any other control voltage source. > FCV2 also controls the cutoff frequency but has the attenuator knob beside it so you can control how much. > QCV controls the resonance (Q, emphasis) > > and the switch at the bottom just toggles between filter types on each of the output jacks eg: the bottom jack is either 1 pole low pass or if the switch is to the right it's 2pole low pass. > > That's about it. Go crazy. > > Scott > > > > > > At 01:20 PM 5/11/2015, you wrote: >> >> >> I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New to this so just wanted a few patch ideas to get me going like most of the other doepfer PDFs have.. Is there a pdf for another filter which you can recommend looking at at ? Cheers jase >> >> Sent from my iPhone >> >>> On 11 May 2015, at 13:32, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] < Doepfer_a100@yahoogroups.com> wrote: >>> >>> >>> >>> It doesn't work any differently to the others, the manual lists the filter types if that's what you need? >>> >>> Neil >>> >>> Sent from my iPhone >>> >>>> On 11 May 2015, at 09:47, sachavaughan@yahoo.com [Doepfer_a100] < Doepfer_a100@yahoogroups.com> wrote: >>>> >>>> >>>> >>>> Hi, don't suppose anyone has any patch examples or ideas on how to use the titled filter do they? >>>> >>>> >>>> Cheers Jase > > > >