Doepfer

just watch the A107 PDF because that's the same filters individualy .the aim to get several output is to mix or crossing the diferents outut , for example with a A 134-2 or a A 144 and a A 135 .Fitz

      De : "Scott Rogers scott@scottfromcanada.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 À : Doepfer_a100@yahoogroups.com 
 Envoyé le : Lundi 11 mai 2015 20h23
 Objet : Re: [Doepfer_a100] A106-6 XP filter
   
    The manual I got with the Basis System 2 also did not have a page forthat filter.

There is not much to know though.

Plug something into the audio input (and turn the level up) and then takethe output from one of the jacks on the right side.

A is All Pass
H is High Pass
B is Band Pass
N is Notch
L is Low Pass

The number is the number of poles

4 = 4 pole = 24db/octave
2 = 2 poles = 12db/octave

FCV1 is control voltage that controls the Cutoff frequency. Patch in theoutput of an envelope generator or any other control voltage source.
FCV2 also controls the cutoff frequency but has the attenuator knobbeside it so you can control how much.
QCV controls the resonance (Q, emphasis)

and the switch at the bottom just toggles between filter types on each ofthe output jacks eg: the bottom jack is either 1 pole low pass or if theswitch is to the right it's 2pole low pass.

That's about it. Go crazy.

Scott





At 01:20 PM 5/11/2015, you wrote:

  

I have the a100 Manuel and noticed the a106-6 didn't have a pdf.. New tothis so just wanted a few patch ideas to get me going like most of theother doepfer PDFs have.. Is there a pdf for another filter which you canrecommend looking at at ? Cheers jase 

Sent from my iPhone

On 11 May 2015, at 13:32, Neil Kaganblinkenlicht@yahoo.com[Doepfer_a100]<Doepfer_a100@yahoogroups.com> wrote:


  

It doesn't work any differently to the others, the manual lists thefilter types if that's what you need?

Neil 

Sent from my iPhone

On 11 May 2015, at 09:47,sachavaughan@yahoo.com[Doepfer_a100]<Doepfer_a100@yahoogroups.com> wrote:


  

Hi, don't suppose anyone has any patch examples or ideas on how to usethe titled filter do they? 


Cheers Jase