Doepfer

From the theory it should make no difference because each group with the four blade terminals is connected to the same signal (-12V,
GND or +12V) because the four terminals of each group are shortened. I have no idea why wiring them identically solved the problem.
Anyway - it's good tp know that now everything is fine.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Samstag, 4. Juli 2015 09:14
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: trouble with VC patching to second G6 frame
>
>
>
>
> in short the grounds were wired differently on each frame.  The solution was to wire them identically.
>
> Here is what they looked like before (problem state).  I made them both look like the right side photo.
>
> https://groups.yahoo.com/neo/groups/Doepfer_a100/photos/albums/1830938856/lightbox/448632445?orderBy=ordinal&sortOrder=asc
> &photoFilter=ALL#zax/448632445
>