Doepfer

....And I certainly will do that.
Learning learning....

Funny thing, I am more collecting and adjusting my Doepfer setup (or Dieter room as my wife is calling it) then making sounds. 
But I think it is the best way to know the working of every part of this system. 

Cheers

Jacco Ville


Verstuurd vanaf mijn iPhone SE Lunatik 

> Op 18 aug. 2016 om 12:19 heeft yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
> 
> > .... By the way ;-)
> >
> > I found out the attenuator function of P1 and P2
> > Very handy to set the threshold of the quantizer behaviour.
> > I noticed that with critical voltages from my A155's with a knob
> > fully cw the voltage of 0.970V in 1V modus was not enough to get
> > a full scale from C to C.
> > Now I made the threshold of the A156 a few mV earlier to deal with
> > this problem.
> >
> > Cheers
> >
> > Jacco Ville
> > The Netherlands
> 
> That's a solution. But the correct way would be to adjust the A-155 so that
> it outputs 1.0V in 1V mode. For this a trimming potentiometer (P9') is
> available on the upper A-155 potentiometer board.
> 
> Best wishes
> Dieter Doepfer
> 
>