On Thursday, August 18, 2016, Jacco Ville jaccoville@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
....And I certainly will do that.Learning learning....Funny thing, I am more collecting and adjusting my Doepfer setup (or Dieter room as my wife is calling it) then making sounds.But I think it is the best way to know the working of every part of this system.CheersJacco Ville
Verstuurd vanaf mijn iPhone SE Lunatik
Op 18 aug. 2016 om 12:19 heeft yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:> .... By the way ;-)
>
> I found out the attenuator function of P1 and P2
> Very handy to set the threshold of the quantizer behaviour.
> I noticed that with critical voltages from my A155's with a knob
> fully cw the voltage of 0.970V in 1V modus was not enough to get
> a full scale from C to C.
> Now I made the threshold of the A156 a few mV earlier to deal with
> this problem.
>
> Cheers
>
> Jacco Ville
> The Netherlands
That's a solution. But the correct way would be to adjust the A-155 so that
it outputs 1.0V in 1V mode. For this a trimming potentiometer (P9') is
available on the upper A-155 potentiometer board.
Best wishes
Dieter Doepfer