Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Deopfer / Grids sync problem.

2016-12-29 by Nicolaj

Thanks for your input.
I’ll try your suggestions. Of course the nicer approach would be for the Grids to sync up automatically, without me having to press any buttons.
I’ll see what works and report back.
Br, Nicolaj.


> On 28 Dec 2016, at 11.29, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> I don't own a Grid, but I think the problem is, that the Grids expects 
> a reset when the clock is stopped.
> 
> In the end you were on the right track, when you pressed the reset 
> button, while the clock was stopped, but you did not remove the yellow 
> cable which additionally caused a reset while the clock was running again.
> 
> If I am right then the correct handling is like this:
> * press stop in Cubase and reset Cubase to zero
> * connect clock out of the A-190-8 with clock in of the Grid
> * press reset on the Grid
> * press start in Cubase
> 
> I am not sure, but maybe it would work too if you connect the A-190-8 
> stop-output with the Grids reset-input. Should be worth the test.
> 
> Florian
> 
> On 27.12.16 20:50 , Nicolaj etc@sidestuff.dk <mailto:etc@sidestuff.dk> [Doepfer_a100] wrote:
> > I own a Doepfer A-190-8 midi clock sync module, and a Mutable Instruments Grids drum sequencer.
> > For some reason I cannot get them to sync properly to the song tempo in Cubase.
> > Or in other words: the tempo sync ok, but the Grids module doesn’t start in time with Cubase.
> > I’m not sure if it’s a problem with the Doepfer module or the Grids module, or if it has something to do with the way I’ve set the communication up between them.
> >
> > I recorded a video illustrating the issue. Any help is greatly appreciated as I’ve had this issue ever since I first bought these modules.
> > Best regards (and happy new year) from Nicolaj.
> >
> > The video is here:
> > https://youtu.be/4mowzjWl9sg <https://youtu.be/4mowzjWl9sg>
> >
> > ------------------------------------
> > Posted by: Nicolaj<etc@sidestuff.dk <mailto:etc@sidestuff.dk>>
> > ------------------------------------
> >
> >
> > ------------------------------------
> >
> > Yahoo Groups Links
> >
> >
> >
> 
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.