Doepfer

Hi

On 29.12.16 18:30 , Nicolaj etc@sidestuff.dk [Doepfer_a100] wrote:
> Of course the nicer approach would be for the Grids to sync up 
> automatically,
Using the A-190-8stop-output with the Grids reset-input should work 
automatically.

And another approach might be to delay the clock a little bit.

Roland demands for the DIN-Sync clock sender, that the first clock tick 
must come 9ms after the rising slope of the start/stop-gate. They do 
this because you always first want to reset the counter and then start 
triggering the counter.

Florian