Doepfer

Pay attention to the note the A-190-2 user's manual on page 8:

"Important  note:  Pay  attention  that  some  manufacturers
count  the  Midi  program  change  numbers  from  1....128,
others from 0...127. In this manual the counting 1...128 is
used.  Please  look  into  the  user's  manual  of  your  Midi
device which type of counting is used. If the counting type
0...127  is  used  one  has  to  subtract  1  from  the  program
change  numbers  in  the  table  above.  For  some  devices
(especially  software  sequencers)  the  type  of  program
change  numbering  can  be  selected.  In  this  case  you
should use the 1...128 range to agree with the numbers in
the table above."

Maybe this the reason for the problem.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Freitag, 12. Mai 2017 16:25
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] A-190-3 Velocity
>
>
> Hi to you all,
>
> I’m trying rather unsuccessfully to turn off velocity on CV 3 and
> 4 on the A-190-3. I’ve sent program changes from Logic but
> nothing seems to work. Has anyone on here had success and if so
> how? I have both Logic and Ableton.
>
> Thanks,
>
> Neil
>
> ------------------------------------
> Posted by: Neil Kagan <nkagan@mac.com>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>