Doepfer

Hi Dieter,

I've tried both formats. Neither is working.

Neil

Sent from my iPhone

> On 15 May 2017, at 09:22, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Pay attention to the note the A-190-2 user's manual on page 8:
> 
> "Important  note:  Pay  attention  that  some  manufacturers
> count  the  Midi  program  change  numbers  from  1....128,
> others from 0...127. In this manual the counting 1...128 is
> used.  Please  look  into  the  user's  manual  of  your  Midi
> device which type of counting is used. If the counting type
> 0...127  is  used  one  has  to  subtract  1  from  the  program
> change  numbers  in  the  table  above.  For  some  devices
> (especially  software  sequencers)  the  type  of  program
> change  numbering  can  be  selected.  In  this  case  you
> should use the 1...128 range to agree with the numbers in
> the table above."
> 
> Maybe this the reason for the problem.
> 
> Best wishes
> Dieter Doepfer
> 
> 
>> -----Ursprüngliche Nachricht-----
>> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
>> Gesendet: Freitag, 12. Mai 2017 16:25
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: [Doepfer_a100] A-190-3 Velocity
>> 
>> 
>> Hi to you all,
>> 
>> I’m trying rather unsuccessfully to turn off velocity on CV 3 and
>> 4 on the A-190-3. I’ve sent program changes from Logic but
>> nothing seems to work. Has anyone on here had success and if so
>> how? I have both Logic and Ableton.
>> 
>> Thanks,
>> 
>> Neil
>> 
>> ------------------------------------
>> Posted by: Neil Kagan <nkagan@mac.com>
>> ------------------------------------
>> 
>> 
>> ------------------------------------
>> 
>> Yahoo Groups Links
>> 
>> 
>> 
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>