Doepfer

hi,
such a module existed (A191 Midi to CV), but has now been discontinued.
 i have it in my Doepfer system and it is very nice for the midi cc's to cv conversion and for the nice Shepard tone generation.

best regards,Bakis.
 


      From: "Ville Oikarinen ville@oikarinen.org [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 To: Doepfer_a100@yahoogroups.com 
 Sent: Friday, September 22, 2017 2:09 PM
 Subject: [Doepfer_a100] Suggestion: Simple+cheap multiple MIDI CC to CV converter
   
    Hello.

I have a module suggestion: a simple cheap module that converts
multiple MIDI control change messages into multiple control voltages.

AFAIK, the simple and cheap MIDI-CV converters (like A-190-4) don't
support many CCs, only velocity + one controller. Only expensive
converters support multiple CCs.

I don't understand electronics, but I guess it wouldn't cost too much
to just skip note ons and concentrate on a set of CCs and output them
as voltages. To keep costs down, the MIDI channel and controller
numbers could be hard-coded. This way no user interface would be
needed.

Or, if it doesn't cost much, maybe a switch for MIDI channel can be
added. But the controllers can be any predefined set, because
computers and their software can easily accommodate to that.

Maybe it would be nice to support both 7 and 14 bit controllers, but
if not, 14 bits would be better, for accuracy of the values rather
than speed of change.

If anybody, Doepfer would be the company to achieve this, right? :)

- Ville Oikarinen