Doepfer

We have such a device available as a DIY product (MTV16) but not as module.
It's easy for a DIYer to mount the MTV16 board behind a front panel with 16
sockets and wire the 16 sockets to the MTV16. And the MTV16 could be powered
by the +12V of the A-100 bus. I'm not sure if there are sufficient inquiries
to justify the "conversion" of the MTV16 into a module.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Freitag, 22. September 2017 12:41
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Suggestion: Simple+cheap multiple MIDI CC to CV
> converter
>
>
> Hello.
>
> I have a module suggestion: a simple cheap module that converts
> multiple MIDI control change messages into multiple control voltages.
>
> AFAIK, the simple and cheap MIDI-CV converters (like A-190-4) don't
> support many CCs, only velocity + one controller. Only expensive
> converters support multiple CCs.
>
> I don't understand electronics, but I guess it wouldn't cost too much
> to just skip note ons and concentrate on a set of CCs and output them
> as voltages. To keep costs down, the MIDI channel and controller
> numbers could be hard-coded. This way no user interface would be
> needed.
>
> Or, if it doesn't cost much, maybe a switch for MIDI channel can be
> added. But the controllers can be any predefined set, because
> computers and their software can easily accommodate to that.
>
> Maybe it would be nice to support both 7 and 14 bit controllers, but
> if not, 14 bits would be better, for accuracy of the values rather
> than speed of change.
>
> If anybody, Doepfer would be the company to achieve this, right? :)
>
> - Ville Oikarinen
>
>
> ------------------------------------
> Posted by: Ville Oikarinen <ville@oikarinen.org>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>