Doepfer

The modules generally have a 1K output impedance so with short cable runs (say 3 meters) crosstalk should not be an issue.

> On 30 Dec 2017, at 22:12, Laurie elby_designs@ozemail.com.au [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Not related to this issue, but will there be a problem because of the use of twisted pairs? Couldn't patching a 'noisy' signal in the same pair as, say, a 1V/Octave for a VCO, or with an audio signal lead to possible issues?.
> 
> Also surprised that as an inter-system connector, that it does not provide a common ground connection
> 
> Best Regards
> 
> Laurie Biddulph
> Mobile.......: +61 0400 257 645
> Phone.......: +61 02 4340 0938
> Skype.......: widgetoz
> 
> <icon-www.jpg> <http://www.elby-designs.com/><icon-facebook.jpg> <https://www.facebook.com/euro.serge.modular/>
> ELBY Designs
> 9 Follan Close
> Kariong
> NSW 2250
> Australia
> 
> ABN: 70 022 727 605
> 
> <image-piano-chicken.jpg> <http://www.elby-designs.com/webtek/euro-serge/euro-serge.thm> 2017 - Year of the EuroSerge Rooster
> 
> On 30/12/2017 10:43 PM, Jacco Ville jaccoville@yahoo.com <mailto:jaccoville@yahoo.com> [Doepfer_a100] wrote:
>> Seems there are cross-cables also....
>> I’m not very familiar with CAT cables but when this module was introduced I took a small dive into this kind of connections because the provided cable is a bit short. 
>> 
>> 
>> Sent from my IPhone. 
>> 
>> Op 30 dec. 2017 om 11:31 heeft Neil Kagan nkagan@mac.com <mailto:nkagan@mac.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> het volgende geschreven:
>> 
>>>  
>>> Do they use a cat5e or cat6 cable? The connector will be the same. 
>>> 
>>> 
>>> Neil
>>> 
>>> Sent from my iPhone
>>> 
>>> On 30 Dec 2017, at 09:53, Jonathan jss9h@aol.com <mailto:jss9h@aol.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
>>> 
>>>>  
>>>> Hi everyone. Almost Happy (Christian) New Year. I bought myself a pair of the new multicore modules as a Xmas treat (how incredibly useful in a large system Dieter - amazing that no-one has thought of it before). I have a very odd problem - The modules link perfectly with the cables supplied but they are only very short. When I try any other network cables however nothing seems to connect. I have checked the cables by linking my laptop to the router and that works fine, but I get no connections at all when I use them between the A180-9s. One of them is 1m long and two are 3m. Any suggestions please?
>>>> Jonathan
>>>> >From my iPad Air
>>>> 
>> 
> 
> 
>