Yahoo Groups archive
Messages
Page 144 of 564 · 28179 messages matched
2010-05-20 by Lars
Thanks for the reply! Would an attenuator like the A-183-1 work to adjust the CV? /Lars --- In Doepfer_a100@yahoogroups.com, Shrewsbury Marie wrote: > > As i recall i tried controlling the osc on a moogerfooger ring mod from the cv outs on a SH101 a few years back and had the sam
2010-05-20 by phono 1337
thanks Dieter that's everything I wanted to know. Paul On 20 May 2010 08:24, wrote: > > > You find my comments written inline > > Best wishes > Dieter Doepfer > > > > The new diy synth looks interesting but ive yet to find any full audio > examples. > > As we are totally busy at
2010-05-20 by grimshaw_stuart
i'd second that. i've never had any issues at all on stage, and i've been working the stuff pretty hard in the last few years. transport by bus, train, lorry or trolley (!), uncountable knocks and whatever, gigs in hot sweaty clubs and outdoors, and most recently a glass of red w
2010-05-20 by Shrewsbury Marie
As i recall i tried controlling the osc on a moogerfooger ring mod from the cv outs on a SH101 a few years back and had the same sort of problem, which i didn;t have the bits to do anything about then. I think there's an offset on the moog osc that's stopping it going down to zer
2010-05-20 by yahoo@doepfer.de
You find my comments written inline Best wishes Dieter Doepfer > The new diy synth looks interesting but ive yet to find any full audio examples. As we are totally busy at the moment (no crisis here) audio samples will have to wait. But I hope there will come some samples as soon
2010-05-20 by yahoo@doepfer.de
> Does anyone know how to adjust the slight difference of > intonation between e.g. Doepfer A-110 oscillator compared to a > moogerfooger oscillator (e.g. in the freqbox)? If I tune it at > the lowest pitch it gets gradually out of tune going up a couple > of octaves. > > I have
2010-05-19 by phono 1337
thanks Florian. On 19 May 2010 19:18, Florian Anwander wrote: > > > Hi phono > > > > first is this a brand new design or is it based on the existing > > dopefer range like the dark energy or something ? I already own an > > a-111-5 so i'm jsut wondering about the tone. > It is de
2010-05-19 by Florian Anwander
Hi phono > first is this a brand new design or is it based on the existing > dopefer range like the dark energy or something ? I already own an > a-111-5 so i'm jsut wondering about the tone. It is definitely not an A-111-5; I cannot judge, how many existing designs went into it.
2010-05-19 by Bakis Sirros
hi all, once again, our Doepfer A100P9, full of a100 modules, performed flawlessly in our PW live performance on last Saturday, (opening for The Kilimanjaro DarkJazz Ensemble) in Larisa, Greece. i can say, with great certainty, that the A100 modular is a 'live' instrument, for su
2010-05-19 by phono 1337
The new diy synth looks interesting but ive yet to find any full audio examples. I've a few questions about the unit, first is this a brand new design or is it based on the existing dopefer range like the dark energy or something ? I already own an a-111-5 so i'm jsut wondering a
2010-05-19 by paulshillito
yup, exciting isn't it. All the Doepfer modules for sale were in separate post and they are all sold. --- In Doepfer_a100@yahoogroups.com, "York Luethje" wrote: > > Is this to become a blow by blow? Because I for one can't wait to hear how it will end. And wow, not a single Doepf
2010-05-19 by Lars
Does anyone know how to adjust the slight difference of intonation between e.g. Doepfer A-110 oscillator compared to a moogerfooger oscillator (e.g. in the freqbox)? If I tune it at the lowest pitch it gets gradually out of tune going up a couple of octaves. I have the same probl
2010-05-19 by davevosh@aol.com
the module has been sold - thanks, dave [Non-text portions of this message have been removed]
2010-05-19 by York Luethje
Is this to become a blow by blow? Because I for one can't wait to hear how it will end. And wow, not a single Doepfer module among the ones on offer! Sent via BlackBerry -----Original Message----- From: "paulshillito" Date: Wed, 19 May 2010 13:45:00 To: Subject: [Doepfer_a100] Re
2010-05-19 by paulshillito
AFG and E350 are SOLD Price drop on Livewire Freqenstiener to £175 and MOTM E340 Cloud generator £260. Paul --- In Doepfer_a100@yahoogroups.com, "paulshillito" wrote: > > I have the following units for sale in the UK all in Euro format, all are ony a month or so old, selling due
2010-05-19 by davevosh@aol.com
hello to all - for sale : harvestman hertz donut $300 i`ll pay shipping in north america - check, m.o., paypal thanks, dave [Non-text portions of this message have been removed]
2010-05-19 by Bakis Sirros
off-list, please. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musi
2010-05-19 by Paul Shillito
HI Jean, Sorry the E350 is sold now, just got the E340 and frequenstiener left. Regards Paul. on 17/5/10 8:13 PM, Doepfer_a100@yahoogroups.com wrote: > Any interest in a trade with a TipTop z8000? > > I'd love me some MOTM E350 > > Greetings, > > Jean > > 2010/5/16 paulshillito >
2010-05-18 by wisekodama
A176 is now sold. Someone buy the A188-1 C 2048 stage BBD! :-)
2010-05-18 by paulshillito
All SOLD. --- In Doepfer_a100@yahoogroups.com, "paulshillito" wrote: > > For sale in the UK > > Doepfer A155 sequencer £185 (2 are available) > > Doepfer A154 (sequencer controller for the A155) £120 > > Shipping in UK £7, Europe £13 > > Payment by paypal and includes paypal fees
2010-05-18 by Bakis Sirros
http://www.youtube.com/watch?v=mMprgVRldag Created by Dimitris D. Davakis for "Shade", a track from Parallel Worlds' cd album "Shade" 2009 DiN records. Photography by G. Gyralexis. http://www.youtube.com/watch?v=69MlTOyn5DE Created by Dimitris D. Davakis for "Into the Caves of th
2010-05-18 by wisekodama
Hello, I am looking to sell these Doepfer modules. Preferably in the U.S. A188-1 2048 Stage BBD $135 A176 Control Voltage Source $45 OR $170 for both! Please include $8 for insured shipping. I have good seller feedback on Muffwiggler and KVRAudio.com as kodama. Thanks! :-)
2010-05-18 by Michael Wagner
Hello list, I'm looking for a few modules I'd like to trade in for some Doepfer modules. The modules I'd like to have are: Doepfer A-132-3 Dual lin/exp. VCA Doepfer A-190-2 Low Cost Midi-to-CV Bananalogue Serge VCS Makenoise Moddemod The modules I have available for trade/sale ar
2010-05-17 by Bakis Sirros
again, please, this should be private mail. Bakis Sirros --- On Mon, 5/17/10, J S wrote: > From: J S > Subject: Re: [Doepfer_a100] FS : (UK) Livewire AGF, Frequenstiener, MOTM E340 & E350 > To: Doepfer_a100@yahoogroups.com > Date: Monday, May 17, 2010, 9:48 PM > Any interest in a
2010-05-17 by J S
Any interest in a trade with a TipTop z8000? I'd love me some MOTM E350 Greetings, Jean 2010/5/16 paulshillito > > > I have the following units for sale in the UK all in Euro format, all are > ony a month or so old, selling due to buying a Moog Voyager and I have few > too many V
2010-05-16 by paulshillito
Both A155's and A154 are ON HOLD --- In Doepfer_a100@yahoogroups.com, "paulshillito" wrote: > > For sale in the UK > > Doepfer A155 sequencer £185 (2 are available) > > Doepfer A154 (sequencer controller for the A155) £120 > > Shipping in UK £7, Europe £13 > > Payment by paypal a
2010-05-16 by paulshillito
I have the following units for sale in the UK all in Euro format, all are ony a month or so old, selling due to buying a Moog Voyager and I have few too many VCOs. All bought from Postmodular in London. Livewire AFG £290 Livewire Freqenstiener £180 MOTM E340 Cloud generator £265
2010-05-16 by paulshillito
For sale in the UK Doepfer A155 sequencer £185 (2 are available) Doepfer A154 (sequencer controller for the A155) £120 Shipping in UK £7, Europe £13 Payment by paypal and includes paypal fees PM me off list please Regards Paul
2010-05-14 by Monroe Eskew
Oh very good, I did not realize what those modules were for. I guess my 8(?) module setup has a little difference in that fade time can be much smaller than the cycle time. On Thu, May 13, 2010 at 11:47 PM, wrote: > > > I don't think so because we have this features already avail
2010-05-14 by Bakis Sirros
ok. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaximamagnet
2010-05-14 by yahoo@doepfer.de
> sounds interesting! > Dieter? > should i make a poll? I don't think so because we have this features already available: A-135/A-144 or A-135/A-143-9 combo. Best wishes Dieter Doepfer
2010-05-14 by Monroe Eskew
It could be done with just 2 VCA's, one for even numbered steps, one for odd. A clock divider would just switch the odd one every other click while the even channel is on, and vice versa. You could just use one lag generator. You could have two fixed voltages of equal magnitude b
2010-05-14 by james.husted@mac.com
That might be an expensive module - lots of VCAa and Lag/envelope circuits. Probable easier done using Vactrols driven by a A-160/A-161 type circuit with some lag added to smooth the transitions further than the Vactrol's built in lag. -James On May 13, 2010, at 1:52 PM, Monroe E
2010-05-13 by Bakis Sirros
sounds interesting! Dieter? should i make a poll? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memoryg
2010-05-13 by Monroe Eskew
On Thu, May 13, 2010 at 11:46 AM, m brandenberg wrote: > Generally, no. You've just grounded the input of the following stage > and shorted the output of the driving to ground. > > Oh right [Non-text portions of this message have been removed]
2010-05-13 by Monroe Eskew
Module suggestion: Similar to sequential switch, except there would be a crossfade instead of instant step between successive channels. Crossfade time to be set by a knob, selectable from 0 to long. [Non-text portions of this message have been removed]
2010-05-13 by m brandenberg
On Thu, 13 May 2010, Monroe Eskew wrote: > Can you effectively invert a CV by simply switching the connections of tip > and sleeve? Generally, no. You've just grounded the input of the following stage and shorted the output of the driving to ground. -- Monty Brandenberg
2010-05-13 by Monroe Eskew
Can you effectively invert a CV by simply switching the connections of tip and sleeve? This would invert the potential difference, but do most modules only work if the sleeve carries a constant 0V? [Non-text portions of this message have been removed]
2010-05-13 by Jilt van Moorst
figured as much on a logic module, thanks! Jilt On May 13, 2010, at 5:21 PM, achtung_999 wrote: > Jup there is, the a166 are logic inverters only! > The a175 are true voltage inverters. > > grtz > > Ernst > > > > > On Thu, May 13, 2010 at 1:20 PM, Jilt van Moorst wrote: > >> >> >
2010-05-13 by achtung_999
Jup there is, the a166 are logic inverters only! The a175 are true voltage inverters. grtz Ernst On Thu, May 13, 2010 at 1:20 PM, Jilt van Moorst wrote: > > > I'm looking to add some inverters to my system, and was looking at the > A-175. Then I saw the A-166 has two inverters as
2010-05-13 by Jilt van Moorst
I'm looking to add some inverters to my system, and was looking at the A-175. Then I saw the A-166 has two inverters as well, plus a bunch more goodies. Is there a difference in the inverters between the two modules? thanks, Jilt van Moorst
2010-05-07 by Bakis Sirros
Parallel Worlds live @ Stage, Larissa (opening for Kilimanjaro Darkjazz Ensemble). Parallel Worlds will present (alternate versions of) tracks from 3 of their albums, plus unreleased material, combined with atmospheric background visuals of Jim Davakis. Saturday, 15th of May, 'St
2010-05-07 by Bakis Sirros
yes, i think this is true. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk
2010-05-07 by Richard Scott
according to Dieter the mA is just a matter of the heatsink so in principle a bigger heatsink will allow it to feed a number of modules Richard On 5/7/10 4:54 PM, Bakis Sirros wrote: > > > in detail, the A100AD5 can only supply 100mA's. > > Bakis Sirros - Parallel Worlds / Interc
2010-05-07 by York Luethje
Yeah, my wife recently bought a very effective module blocking device. It's called a Smith & Wesson. _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von nerf@rogers.com Gesendet: Donnerstag, 6. Mai 2010 22:04 An: Doepfer_a100@yahoogroups.c
2010-05-07 by Bakis Sirros
great that you are also expanding into Serge territory, but my advice would be to definitely keep more than only 6U of euro modules! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ pa
2010-05-07 by Bakis Sirros
in detail, the A100AD5 can only supply 100mA's. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygei
2010-05-07 by david.salter@thomsonreuters.com
Richard, Your welcome It's unlikely but the adapter is limited to a few hundred milliamps, so keep that in mind. If you want to power a lot of 5V stuff you'll need to increase the heat sink size, then it will take up to 1Amp. David * * * * * * * * * * * * * * * * * * * * * * * *
2010-05-07 by Richard Scott
Thanks David I assumed I needed one for each 5 v module but works for the whole board - so its a bit cleverer than I thought :) Richard On 5/7/10 1:49 PM, david.salter@thomsonreuters.com wrote: > > > Richard you plug it into the distribution board, it takes 12V of the bus > and p
2010-05-07 by david.salter@thomsonreuters.com
Richard you plug it into the distribution board, it takes 12V of the bus and puts 5V back to the bus. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562