Doepfer

Hey guys, I'm selling a fair amount of modules from my modular system in order to 
upgrade my studio with some new equipment.

so here it is...

Doepfer stuff

Doepfer A-100g3 19in Rack - 345.00
2X A-110  Oscillator - 150.00 each
2X A-131  Exponential VCA - 72.00  each
      A-135  4 channel mixer/VCA  132.00
      A-143-1  Complex Envelope  192.00
      A-144  Morph controller   68.00
      A-155  Sequencer  282.00
      A-174  Joystick (no spring)  83.00

LIVEWIRE MODULES
     Dalek Modulator  195.00

HARVESTMAN MODULE
     Malgorithm  214.00

PLAN B MODULES
     Programmable Tap Clock  207.00

email me if you're interested.   egon77@earthlink.net

thanks for your ears.

Charlie

Dollars? Euros?

On Fri, Dec 12, 2008 at 8:37 AM, charlie_visnic <egon77@earthlink.net>wrote:

>   Hey guys, I'm selling a fair amount of modules from my modular system in
> order to
> upgrade my studio with some new equipment.
>
> so here it is...
>
> Doepfer stuff
>
> Doepfer A-100g3 19in Rack - 345.00
> 2X A-110 Oscillator - 150.00 each
> 2X A-131 Exponential VCA - 72.00 each
> A-135 4 channel mixer/VCA 132.00
> A-143-1 Complex Envelope 192.00
> A-144 Morph controller 68.00
> A-155 Sequencer 282.00
> A-174 Joystick (no spring) 83.00
>
> LIVEWIRE MODULES
> Dalek Modulator 195.00
>
> HARVESTMAN MODULE
> Malgorithm 214.00
>
> PLAN B MODULES
> Programmable Tap Clock 207.00
>
> email me if you're interested. egon77@earthlink.net<egon77%40earthlink.net>
>
> thanks for your ears.
>
> Charlie
>
>  
>


[Non-text portions of this message have been removed]

We have added two simple modules to our list of planned modules:

A-183-1 simple passive dual attenuator
A-183-2 single offset generator/attenuator/polarizer/amplifier

The modules are planned for combination with other modules that have no
attenuators and/or offset controls available. Mainly to combine A-100
modules with modules from other manufacturers because most of the A-100
modules are already equipped with attenuator and manual control of the
parameter in question.

Details on our website: www.doepfer.com > PRODUCTS > A-100 > Future/new
modules

Best wishes
Dieter Doepfer

These are the only 4HP Doepfer modules with knobs, aren't they? Will 
the knobs be normal sized?

--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> We have added two simple modules to our list of planned modules:
> 
> A-183-1 simple passive dual attenuator
> A-183-2 single offset generator/attenuator/polarizer/amplifier
> 
> The modules are planned for combination with other modules that 
have no
> attenuators and/or offset controls available. Mainly to combine A-
100
> modules with modules from other manufacturers because most of the A-
100
> modules are already equipped with attenuator and manual control of 
the
> parameter in question.
> 
> Details on our website: www.doepfer.com > PRODUCTS > A-100 > 
Future/new

> modules
> 
> Best wishes
> Dieter Doepfer
>

How about a 6HP 3-channel attenuator? It could be possible, if the 
jacks were in rows of two. Perhaps the ergonomics would be better 
then due to more horizontal "headroom" for the knobs. (I would prefer 
all knobs up and all jacks down arrangement a la Cwejman, but that is 
just me.)

--- In Doepfer_a100@yahoogroups.com, "jalmari3" <jari.jokinen@...> 
wrote:
>
> These are the only 4HP Doepfer modules with knobs, aren't they? 
Will 
> the knobs be normal sized?
> 
> --- In Doepfer_a100@yahoogroups.com, <yahoo@> wrote:
> >
> > We have added two simple modules to our list of planned modules:
> > 
> > A-183-1 simple passive dual attenuator
> > A-183-2 single offset generator/attenuator/polarizer/amplifier
> > 
> > The modules are planned for combination with other modules that 
> have no
> > attenuators and/or offset controls available. Mainly to combine A-
> 100
> > modules with modules from other manufacturers because most of the 
A-
> 100
> > modules are already equipped with attenuator and manual control 
of 

> the
> > parameter in question.
> > 
> > Details on our website: www.doepfer.com > PRODUCTS > A-100 > 
> Future/new
> > modules
> > 
> > Best wishes
> > Dieter Doepfer
> >
>

The 4HP attenuator will fit perfectly in my minicase alongside the
PlanB ELF modules I've got... and passive too. I'm sold :)

S

On Fri, Dec 12, 2008 at 2:47 PM, jalmari3 <jari.jokinen@netikka.fi> wrote:
> How about a 6HP 3-channel attenuator? It could be possible, if the
> jacks were in rows of two. Perhaps the ergonomics would be better
> then due to more horizontal "headroom" for the knobs. (I would prefer
> all knobs up and all jacks down arrangement a la Cwejman, but that is
> just me.)
>
> --- In Doepfer_a100@yahoogroups.com, "jalmari3" <jari.jokinen@...>
> wrote:
>
>>
>> These are the only 4HP Doepfer modules with knobs, aren't they?
> Will
>> the knobs be normal sized?
>>
>> --- In Doepfer_a100@yahoogroups.com, <yahoo@> wrote:
>> >
>> > We have added two simple modules to our list of planned modules:
>> >
>> > A-183-1 simple passive dual attenuator
>> > A-183-2 single offset generator/attenuator/polarizer/amplifier
>> >
>> > The modules are planned for combination with other modules that
>> have no
>> > attenuators and/or offset controls available. Mainly to combine A-
>> 100
>> > modules with modules from other manufacturers because most of the
> A-
>> 100
>> > modules are already equipped with attenuator and manual control
> of
>> the
>> > parameter in question.
>> >
>> > Details on our website: www.doepfer.com > PRODUCTS > A-100 >
>> Future/new
>> > modules
>> >
>> > Best wishes
>> > Dieter Doepfer
>> >
>>
>
>

Sorry about that, in dollars.


--- In Doepfer_a100@yahoogroups.com, achtung_999 <heinrich.himmelwasser@...> 
wrote:

>
> Dollars? Euros?
> 
> On Fri, Dec 12, 2008 at 8:37 AM, charlie_visnic <egon77@...>wrote:
> 
> >   Hey guys, I'm selling a fair amount of modules from my modular system in
> > order to
> > upgrade my studio with some new equipment.
> >
> > so here it is...
> >
> > Doepfer stuff
> >
> > Doepfer A-100g3 19in Rack - 345.00
> > 2X A-110 Oscillator - 150.00 each
> > 2X A-131 Exponential VCA - 72.00 each
> > A-135 4 channel mixer/VCA 132.00
> > A-143-1 Complex Envelope 192.00
> > A-144 Morph controller 68.00
> > A-155 Sequencer 282.00
> > A-174 Joystick (no spring) 83.00
> >
> > LIVEWIRE MODULES
> > Dalek Modulator 195.00
> >
> > HARVESTMAN MODULE
> > Malgorithm 214.00
> >
> > PLAN B MODULES
> > Programmable Tap Clock 207.00
> >
> > email me if you're interested. egon77@...<egon77%40earthlink.net>
> >
> > thanks for your ears.
> >
> > Charlie
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>

Hehe. If one has 4HP of space left, a 4HP unit fits better of course.

Having a knob at each 4HP, makes the knob spacing same as in A-155 
sequencer... not totally un-ergonomic. Still, I would prefer a 6HP 3-
channel unit. Space usage efficiency would be the same. 

--- In Doepfer_a100@yahoogroups.com, "Steven Taylor" <steev@...> 
wrote:
>
> The 4HP attenuator will fit perfectly in my minicase alongside the
> PlanB ELF modules I've got... and passive too. I'm sold :)
> 
> S
> 
> On Fri, Dec 12, 2008 at 2:47 PM, jalmari3 <jari.jokinen@...> wrote:
> > How about a 6HP 3-channel attenuator? It could be possible, if the
> > jacks were in rows of two. Perhaps the ergonomics would be better
> > then due to more horizontal "headroom" for the knobs. (I would 
prefer
> > all knobs up and all jacks down arrangement a la Cwejman, but 
that is
> > just me.)
> >
> > --- In Doepfer_a100@yahoogroups.com, "jalmari3" <jari.jokinen@>
> > wrote:
> >
> >>
> >> These are the only 4HP Doepfer modules with knobs, aren't they?
> > Will
> >> the knobs be normal sized?
> >>
> >> --- In Doepfer_a100@yahoogroups.com, <yahoo@> wrote:
> >> >
> >> > We have added two simple modules to our list of planned 
modules:
> >> >
> >> > A-183-1 simple passive dual attenuator
> >> > A-183-2 single offset generator/attenuator/polarizer/amplifier
> >> >
> >> > The modules are planned for combination with other modules that
> >> have no
> >> > attenuators and/or offset controls available. Mainly to 
combine A-
> >> 100
> >> > modules with modules from other manufacturers because most of 
the

> > A-
> >> 100
> >> > modules are already equipped with attenuator and manual control
> > of
> >> the
> >> > parameter in question.
> >> >
> >> > Details on our website: www.doepfer.com > PRODUCTS > A-100 >
> >> Future/new
> >> > modules
> >> >
> >> > Best wishes
> >> > Dieter Doepfer
> >> >
> >>
> >
> >
>

Yeah, and these yellow short cables are GORGEOUS!!!


DIETER IF YOU ARE READING 


I noticed that the A138m new matrix project page is not working correct...

Best

Alexandre


--- In Doepfer_a100@yahoogroups.com, "jalmari3" <jari.jokinen@...> wrote:

>
> Hehe. If one has 4HP of space left, a 4HP unit fits better of course.
> 
> Having a knob at each 4HP, makes the knob spacing same as in A-155 
> sequencer... not totally un-ergonomic. Still, I would prefer a 6HP 3-
> channel unit. Space usage efficiency would be the same. 
> 
> --- In Doepfer_a100@yahoogroups.com, "Steven Taylor" <steev@> 
> wrote:
> >
> > The 4HP attenuator will fit perfectly in my minicase alongside the
> > PlanB ELF modules I've got... and passive too. I'm sold :)
> > 
> > S
> > 
> > On Fri, Dec 12, 2008 at 2:47 PM, jalmari3 <jari.jokinen@> wrote:
> > > How about a 6HP 3-channel attenuator? It could be possible, if the
> > > jacks were in rows of two. Perhaps the ergonomics would be better
> > > then due to more horizontal "headroom" for the knobs. (I would 
> prefer
> > > all knobs up and all jacks down arrangement a la Cwejman, but 
> that is
> > > just me.)
> > >
> > > --- In Doepfer_a100@yahoogroups.com, "jalmari3" <jari.jokinen@>
> > > wrote:
> > >
> > >>
> > >> These are the only 4HP Doepfer modules with knobs, aren't they?
> > > Will
> > >> the knobs be normal sized?
> > >>
> > >> --- In Doepfer_a100@yahoogroups.com, <yahoo@> wrote:
> > >> >
> > >> > We have added two simple modules to our list of planned 
> modules:
> > >> >
> > >> > A-183-1 simple passive dual attenuator
> > >> > A-183-2 single offset generator/attenuator/polarizer/amplifier
> > >> >
> > >> > The modules are planned for combination with other modules that
> > >> have no
> > >> > attenuators and/or offset controls available. Mainly to 
> combine A-
> > >> 100
> > >> > modules with modules from other manufacturers because most of 
> the
> > > A-
> > >> 100
> > >> > modules are already equipped with attenuator and manual control
> > > of
> > >> the
> > >> > parameter in question.
> > >> >
> > >> > Details on our website: www.doepfer.com > PRODUCTS > A-100 >
> > >> Future/new
> > >> > modules
> > >> >
> > >> > Best wishes
> > >> > Dieter Doepfer
> > >> >
> > >>
> > >
> > >
> >
>

On Fri, Dec 12, 2008 at 7:36 PM, bellenger_a <bellenger_a@yahoo.fr> wrote:
> Yeah, and these yellow short cables are GORGEOUS!!!

Perfect also for my new minicase! The only complaint I have about it
really is that it only has 4 bus connectors, when this new upsurge of
4HP modules means it could have wider possibilities.

S

excellent!

will be getting the 183-2 for sure, totally what I need and in the
perfect size as well.

Question about it, on +the information page it says that by changing
an internal jumper it can provide voltages from -5 to +5 volts for the
offset control(which I plan on doing)  does that jumper change have
any effect in the attenuator or will the attenuator work exactly the
same (preferable I think)?

C.

--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:

>
> We have added two simple modules to our list of planned modules:
> 
> A-183-1 simple passive dual attenuator
> A-183-2 single offset generator/attenuator/polarizer/amplifier
> 
> The modules are planned for combination with other modules that have no
> attenuators and/or offset controls available. Mainly to combine A-100
> modules with modules from other manufacturers because most of the A-100
> modules are already equipped with attenuator and manual control of the
> parameter in question.
> 
> Details on our website: www.doepfer.com > PRODUCTS > A-100 > Future/new
> modules
> 
> Best wishes
> Dieter Doepfer
>

> These are the only 4HP Doepfer modules with knobs, aren't they? Will
> the knobs be normal sized?

The module is planned for normal sized knobs but they could be replaced by
smaller ones (like the knob of the A-189-1 rotary switch or the A-190-2
glide control).

Best wishes
Dieter Doepfer

> Yeah, and these yellow short cables are GORGEOUS!!!
>
>
> DIETER IF YOU ARE READING
>
>
> I noticed that the A138m new matrix project page is not working correct...
>
> Best
>
> Alexandre

Thank you for the note. We have repaired the page.

Best wishes
Dieter Doepfer

> Perfect also for my new minicase! The only complaint I have about it
> really is that it only has 4 bus connectors, when this new upsurge of
> 4HP modules means it could have wider possibilities.
>
> S

I believe that there are only very few applications with more than 4 modules
in the mini case. With a special bus cable (one connector for the bus and 2
or 3 for modules the problem can be solved. We did this for one customer and
so far it's the only  case I know (he wanted to install only 4 HP modules in
the mini case).

Best wishes
Dieter Doepfer

> excellent!
>
> will be getting the 183-2 for sure, totally what I need and in the
> perfect size as well.
>
> Question about it, on +the information page it says that by changing
> an internal jumper it can provide voltages from -5 to +5 volts for the
> offset control(which I plan on doing)  does that jumper change have
> any effect in the attenuator or will the attenuator work exactly the
> same (preferable I think)?
>
> C.

This jumper affects only the offset range (0...+5V or -5V...+5V) but not the
attenuator.

Best wishes
Dieter Doepfer

On Mon, Dec 15, 2008 at 9:31 AM,  <yahoo@doepfer.de> wrote:
>> Perfect also for my new minicase! The only complaint I have about it
>> really is that it only has 4 bus connectors, when this new upsurge of
>> 4HP modules means it could have wider possibilities.
>>
>> S
>
> I believe that there are only very few applications with more than 4 modules
> in the mini case. With a special bus cable (one connector for the bus and 2
> or 3 for modules the problem can be solved. We did this for one customer and
> so far it's the only case I know (he wanted to install only 4 HP modules in
> the mini case).

That's very interesting Dieter...

My minicase is basically a set of extra modulation modules for my Moog
Voyager, currently it will be

1 x Multiple
2 x A-183-1
1 x A-132-1 (20mA)
2 x PlanB Model 37 ELF LFO (40mA total)
1 x PlanB Model 38 ADSR + 38a Expansion (20mA)

I'd much rather get another ADSR instead of that second 183 though...
i.e. 5 powered modules.

Thanks

Steve