Doepfer

> On 24 Jun 2015, at 09:35, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen!
> 
> There are a few things that since owning my system I know I would find useful. Often these are things where I find myself recreating the patch over again and would like one module rather than five or six! Some of these are already in the pipeline or at least have been discussed by Dieter previously:
> 
> Fluctuating Random Voltages. I keep building this patch; it's so incredibly useful for 1960's style weirdness!
> 
> VC LFO with PWM. Shame this wasn't added to the 147-2 :(
> 
> Mini step sequencer. 8 hp, maybe 5 or 6 steps, with pots for voltage values. 
> 
> Stereo spring reverb. Not sure how this would work but now I have a 188-2 I can see the usefulness!
> 
> Wave table oscillator (or an update to the 112. Better tracking, USB for uploading waves, a 'gate on' mode, higher sample rates.
> 
> Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling.
> 
> 118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.
> 
> 117-2; just an update so the manual control can go down to much slower rates
> 
> I think that's it for now :)
> 
> Neil
> 
> Sent from my iPhone
> 
>

> On 24 Jun 2015, at 12:21, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> 
> I would add a module that measures the rate of change in a control signal and produces another CV proportional to the rate of change. 
> 
> David
> 
> www.movingisliving.co.uk <http://www.movingisliving.co.uk/>
> 
> Sent from my iPhone 
> 
> On 24 Jun 2015, at 09:35, Neil Kagan blinkenlicht@yahoo.com <mailto:blinkenlicht@yahoo.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> 
>>  
>> I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen!
>> 
>> There are a few things that since owning my system I know I would find useful. Often these are things where I find myself recreating the patch over again and would like one module rather than five or six! Some of these are already in the pipeline or at least have been discussed by Dieter previously:
>> 
>> Fluctuating Random Voltages. I keep building this patch; it's so incredibly useful for 1960's style weirdness!
>> 
>> VC LFO with PWM. Shame this wasn't added to the 147-2 :(
>> 
>> Mini step sequencer. 8 hp, maybe 5 or 6 steps, with pots for voltage values. 
>> 
>> Stereo spring reverb. Not sure how this would work but now I have a 188-2 I can see the usefulness!
>> 
>> Wave table oscillator (or an update to the 112. Better tracking, USB for uploading waves, a 'gate on' mode, higher sample rates.
>> 
>> Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling.
>> 
>> 118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.
>> 
>> 117-2; just an update so the manual control can go down to much slower rates
>> 
>> I think that's it for now :)
>> 
>> Neil
>> 
>> Sent from my iPhone
>> 
> 
>

VC LFO with PWM. Shame this wasn't added to the 147-2 :

Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling

118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.

> On 24 Jun 2015, at 12:24, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> That sounds exciting.. what would i do with it? :)
> 
>> On 24 Jun 2015, at 12:21, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>> 
>> I would add a module that measures the rate of change in a control signal and produces another CV proportional to the rate of change. 
>> 
>> David
>> 
>> www.movingisliving.co.uk
>> 
>> Sent from my iPhone 
>> 
>>> On 24 Jun 2015, at 09:35, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>> 
>>>  
>>> I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen!
>>> 
>>> There are a few things that since owning my system I know I would find useful. Often these are things where I find myself recreating the patch over again and would like one module rather than five or six! Some of these are already in the pipeline or at least have been discussed by Dieter previously:
>>> 
>>> Fluctuating Random Voltages. I keep building this patch; it's so incredibly useful for 1960's style weirdness!
>>> 
>>> VC LFO with PWM. Shame this wasn't added to the 147-2 :(
>>> 
>>> Mini step sequencer. 8 hp, maybe 5 or 6 steps, with pots for voltage values. 
>>> 
>>> Stereo spring reverb. Not sure how this would work but now I have a 188-2 I can see the usefulness!
>>> 
>>> Wave table oscillator (or an update to the 112. Better tracking, USB for uploading waves, a 'gate on' mode, higher sample rates.
>>> 
>>> Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling.
>>> 
>>> 118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.
>>> 
>>> 117-2; just an update so the manual control can go down to much slower rates
>>> 
>>> I think that's it for now :)
>>> 
>>> Neil
>>> 
>>> Sent from my iPhone
>>> 
> 
>

> On 24 Jun 2015, at 12:30, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> 
> Well one use - if you play ally of notes in succession you could open the filter automatically rather than use a mod wheel. Or if using theremin or ribbon controllers you can use the rate of hand movement to control things - for instance use a quantizer so you get stable "steps" in your playing but a VC Slew being controlled by the Rate of Change CV to respond to hand speed, that would give a more "natural" sound to a quantized continuous controler 
> 
> David
> 
> www.movingisliving.co.uk <http://www.movingisliving.co.uk/>
> 
> Sent from my iPhone 
> 
> On 24 Jun 2015, at 12:24, Neil Kagan blinkenlicht@yahoo.com <mailto:blinkenlicht@yahoo.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> 
>>  
>> 
>> That sounds exciting.. what would i do with it? :)
>> 
>>> On 24 Jun 2015, at 12:21, David Kellett davidkellettwoulf@yahoo.com <mailto:davidkellettwoulf@yahoo.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
>>> 
>>> 
>>> I would add a module that measures the rate of change in a control signal and produces another CV proportional to the rate of change. 
>>> 
>>> David
>>> 
>>> www.movingisliving.co.uk <http://www.movingisliving.co.uk/>
>>> 
>>> Sent from my iPhone 
>>> 
>>> On 24 Jun 2015, at 09:35, Neil Kagan blinkenlicht@yahoo.com <mailto:blinkenlicht@yahoo.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
>>> 
>>>>  
>>>> I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen!
>>>> 
>>>> There are a few things that since owning my system I know I would find useful. Often these are things where I find myself recreating the patch over again and would like one module rather than five or six! Some of these are already in the pipeline or at least have been discussed by Dieter previously:
>>>> 
>>>> Fluctuating Random Voltages. I keep building this patch; it's so incredibly useful for 1960's style weirdness!
>>>> 
>>>> VC LFO with PWM. Shame this wasn't added to the 147-2 :(
>>>> 
>>>> Mini step sequencer. 8 hp, maybe 5 or 6 steps, with pots for voltage values. 
>>>> 
>>>> Stereo spring reverb. Not sure how this would work but now I have a 188-2 I can see the usefulness!
>>>> 
>>>> Wave table oscillator (or an update to the 112. Better tracking, USB for uploading waves, a 'gate on' mode, higher sample rates.
>>>> 
>>>> Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling.
>>>> 
>>>> 118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.
>>>> 
>>>> 117-2; just an update so the manual control can go down to much slower rates
>>>> 
>>>> I think that's it for now :)
>>>> 
>>>> Neil
>>>> 
>>>> Sent from my iPhone
>>>> 
>>> 
>> 
>> 
> 
>

> On 24 Jun 2015, at 17:49, christian ienni ienni23@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> it's not quite the same thing, but the Koma Kommander is a cool infrared dual cv motion controller, kinda similar to roland's d-beam but for modular. worth checking out.
> 
> From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
> To: Doepfer_a100@yahoogroups.com 
> Sent: Wednesday, June 24, 2015 4:55 AM
> Subject: Re: [Doepfer_a100] Module suggestions
> 
>  
> I only just realised yesterday I’d love one of the VC light sources which are no longer available :(
> 
>

      From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 To: "Doepfer_a100@yahoogroups.com" <Doepfer_a100@yahoogroups.com> 
 Sent: Wednesday, June 24, 2015 12:16 PM
 Subject: Re: [Doepfer_a100] Module suggestions
   
    I'm strictly doepfer only!!

Sent from my iPhone


On 24 Jun 2015, at 17:49, christian ienni ienni23@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:


    it's not quite the same thing, but the Koma Kommander is a cool infrared dual cv motion controller, kinda similar to roland's d-beam but for modular. worth checking out.

      From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 To: Doepfer_a100@yahoogroups.com 
 Sent: Wednesday, June 24, 2015 4:55 AM
 Subject: Re: [Doepfer_a100] Module suggestions
   
    I only just realised yesterday I’d love one of the VC light sources which are no longer available :(

> On 25 Jun 2015, at 00:45, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Like said earlier in the FB group, I am all for the random fluctuating voltages module.
> But only if it is going to be a stand alone module, not dependent on being permanently attached to another module.
> 
> Ernst
> 
>> On Wed, Jun 24, 2015 at 11:09 PM, christian ienni ienni23@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>  
>> ah yes, of course, i forgot. :-)
>> 
>> From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
>> To: "Doepfer_a100@yahoogroups.com" <Doepfer_a100@yahoogroups.com> 
>> Sent: Wednesday, June 24, 2015 12:16 PM
>> Subject: Re: [Doepfer_a100] Module suggestions
>> 
>>  
>> I'm strictly doepfer only!!
>> 
>> Sent from my iPhone
>> 
>> 
>> 
>>> On 24 Jun 2015, at 17:49, christian ienni ienni23@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>> 
>>>  
>>> it's not quite the same thing, but the Koma Kommander is a cool infrared dual cv motion controller, kinda similar to roland's d-beam but for modular. worth checking out.
>>> 
>>> From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
>>> To: Doepfer_a100@yahoogroups.com 
>>> Sent: Wednesday, June 24, 2015 4:55 AM
>>> Subject: Re: [Doepfer_a100] Module suggestions
>>> 
>>>  
>>> I only just realised yesterday I’d love one of the VC light sources which are no longer available :(
> 
>

> -----Ursprungliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Mittwoch, 24. Juni 2015 10:35
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Module suggestions
> 
> 
> I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen!
> 
> There are a few things that since owning my system I know I would find useful. Often these are things where I find myself 
> recreating the patch over again and would like one module rather than five or six! Some of these are already in the 
> pipeline or at least have been discussed by Dieter previously:
> 
> Fluctuating Random Voltages. I keep building this patch; it's so incredibly useful for 1960's style weirdness!
> 
> VC LFO with PWM. Shame this wasn't added to the 147-2 :(
> 
> Mini step sequencer. 8 hp, maybe 5 or 6 steps, with pots for voltage values. 
> 
> Stereo spring reverb. Not sure how this would work but now I have a 188-2 I can see the usefulness!
> 
> Wave table oscillator (or an update to the 112. Better tracking, USB for uploading waves, a 'gate on' mode, higher sample rates.
> 
> Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling.
> 
> 118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.
> 
> 117-2; just an update so the manual control can go down to much slower rates
> 
> I think that's it for now :)
> 
> Neil
> 
> 
> 
> Sent from my iPhone
> 
> ------------------------------------
> Posted by: Neil Kagan <blinkenlicht@yahoo.com>
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>

> On 6 Jul 2015, at 17:04, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Thank you for the suggestions. I'm sure we can include some of them.
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprungliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> > Gesendet: Mittwoch, 24. Juni 2015 10:35
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Module suggestions
> > 
> > 
> > I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen!
> > 
> > There are a few things that since owning my system I know I would find useful. Often these are things where I find myself 
> > recreating the patch over again and would like one module rather than five or six! Some of these are already in the 
> > pipeline or at least have been discussed by Dieter previously:
> > 
> > Fluctuating Random Voltages. I keep building this patch; it's so incredibly useful for 1960's style weirdness!
> > 
> > VC LFO with PWM. Shame this wasn't added to the 147-2 :(
> > 
> > Mini step sequencer. 8 hp, maybe 5 or 6 steps, with pots for voltage values. 
> > 
> > Stereo spring reverb. Not sure how this would work but now I have a 188-2 I can see the usefulness!
> > 
> > Wave table oscillator (or an update to the 112. Better tracking, USB for uploading waves, a 'gate on' mode, higher sample rates.
> > 
> > Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling.
> > 
> > 118-2; with cv control over the noise colour / mix and an option on what gets used for the random output.
> > 
> > 117-2; just an update so the manual control can go down to much slower rates
> > 
> > I think that's it for now :)
> > 
> > Neil
> > 
> > 
> > 
> > Sent from my iPhone
> > 
> > ------------------------------------
> > Posted by: Neil Kagan <blinkenlicht@yahoo.com>
> > ------------------------------------
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo Groups Links
> > 
> > 
> > 
>