Doepfer

Anybody has an idea why the upper switch now has 3 positions instead the mentioned 2....the middle is called "Cst".....I have no clue what to do with it.

Cheers,

Danny - Syndromeda

Hello,

in the final version of the module we replaced the 2-position switch by a 3-position switch to offer more possibilities for the
future. "Cst" is the abbreviation for "Custom Mode". This planned feature is not yet available in the first production series but
the modules are already prepared (i.e. they are already equipped with the 3-position switch so that a firmware update will offer the
additional features). The jumpers on the pcb of the module will be used in future firmware versions to define a "Custom Mode". E.g.
you may select inverted gates or the inverted triggers as custom mode. During power on the upper 6 LEDs display for about 2 seconds
the 6 jumper positions (jumper installed = LED on). This has been made to be able to recall the jumper positions without removing
the module from the case.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Donnerstag, 2. Juli 2015 15:54
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] A-160-2
>
>
>
>
>
> Anybody has an idea why the upper switch now has 3 positions instead the mentioned 2....the middle is called "Cst".....I
> have no clue what to do with it.
> Cheers,
> Danny - Syndromeda