Doepfer

Hi group,
I got a question on how to calibrate the precision adder. 
Any info welcome. 
Jacco

> Hi group,
> I got a question on how to calibrate the precision adder.
> Any info welcome.
> Jacco

Step 1: adjustment of the internal 1V steps

adjust P2 so that the meter reads +1.00V, measured at the center pin of P2

Step 2: adjustment of the amplification

adjust P1 so that at the output appears +4.00V with all switches to "+"
position and Lev.1 control fully CW


Good luck
Dieter Doepfer

Vielen Dank Dieter

Sent from my IPad

Op 27 mrt. 2018 om 16:47 heeft yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:

>> Hi group,
>> I got a question on how to calibrate the precision adder.
>> Any info welcome.
>> Jacco
> 
> Step 1: adjustment of the internal 1V steps
> 
> adjust P2 so that the meter reads +1.00V, measured at the center pin of P2
> 
> Step 2: adjustment of the amplification
> 
> adjust P1 so that at the output appears +4.00V with all switches to "+"
> position and Lev.1 control fully CW
> 
> 
> Good luck
> Dieter Doepfer
> 
> 
> 
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>