Doepfer

The suggested mixer sounds cool. But even more combined modules since 
if you have a small system a dual S & H is of little use while a S & 
H combined with a Slew Limiter would be great. The Trigger Delay 
could be housed with a VC Switch for trigger signals (i.e. trigger 
version of A150). One low cost VCA could go with VC Switch for audio 
signals
 And those having use for 2 S & H can live with 2 slew 
limiters as well
 Regards Ilanode



--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@c...> wrote:
> Hi everybody,
> 
> I have two suggestions regarding new modules:
> 
> The first is an addon-Mixer for filters and similar modules: If I 
want to
> mix several CV _AND_ several Audio-Signals for one Filter, I need 
two
> Modules. But usually I do not need all four inputs of a mixer. So 
my new
> mixer consists of a three channel audio mixer and a two channel dc-
mixer
> for control voltages with an additional 1:1-feedthrough for the CV-
Bus, and
> finally a row of three Multiples to get additional outputs:
> 
> 
>  o-POTI-+ /----o  -> to Audio-In
>    log  | | 
>  o-POTI-+-/ 
>    log  |   /--o  -> to CV1-In   
>  o-POTI-+   |  
>    log      |  o
>             |  |
>  o-POTI-+---/  o  Multiples
>    lin  |      |
>  o-POTI-+      o
>    lin  |
>         ^ 
>     from CV-Bus
> 
> 
> 
> 
> The other idea is, that I do not need double modules like the A170 
or the
> A162, or A175, A150, A148, A130. So the suggestion would be to 
produce
> combined modules, that provide different functions. Especially for 
smaller

> (3HE) systems it is annoying that you waste space with seldom used
> functions.
> 
> Any oppinions?
> 
> Florian

I would combine a low-cost VCA with the A140 for voltage control of 
envelope intensity. 

I'd also combine a low-cost vca (with dual signal inputs instead of 
dual CV inputs) with half a trigger modifier to produce a 4HP logic 
module (and, or, not).

I'd combine a two-channel mixer/attenuator with offset control, with 
an A150 switch to produce a comparitor.

Here's one I've mentioned before - I'd add individual outputs to 
the CV mixer to produce a quad VCA/attenuator/mixer. Oh yeah, throw in 
offset voltages and a moving-coil voltmeter :-)

Joe

--- In Doepfer_a100@yahoogroups.com, "ilanode" <techmeier@w...> wrote:
> The suggested mixer sounds cool. But even more combined modules 
since 
> if you have a small system a dual S & H is of little use while a S & 
> H combined with a Slew Limiter would be great. The Trigger Delay 
> could be housed with a VC Switch for trigger signals (i.e. trigger 
> version of A150). One low cost VCA could go with VC Switch for audio 
> signals
 And those having use for 2 S & H can live with 2 slew 
> limiters as well
 Regards Ilanode
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, Florian Anwander 
> <Florian.Anwander@c...> wrote:
> > Hi everybody,
> > 
> > I have two suggestions regarding new modules:
> > 
> > The first is an addon-Mixer for filters and similar modules: If I 
> want to
> > mix several CV _AND_ several Audio-Signals for one Filter, I need 
> two
> > Modules. But usually I do not need all four inputs of a mixer. So 
> my new
> > mixer consists of a three channel audio mixer and a two channel 
dc-
> mixer
> > for control voltages with an additional 1:1-feedthrough for the 
CV-

> Bus, and
> > finally a row of three Multiples to get additional outputs:
> > 
> > 
> >  o-POTI-+ /----o  -> to Audio-In
> >    log  | | 
> >  o-POTI-+-/ 
> >    log  |   /--o  -> to CV1-In   
> >  o-POTI-+   |  
> >    log      |  o
> >             |  |
> >  o-POTI-+---/  o  Multiples
> >    lin  |      |
> >  o-POTI-+      o
> >    lin  |
> >         ^ 
> >     from CV-Bus
> > 
> > 
> > 
> > 
> > The other idea is, that I do not need double modules like the A170 
> or the
> > A162, or A175, A150, A148, A130. So the suggestion would be to 
> produce
> > combined modules, that provide different functions. Especially for 
> smaller
> > (3HE) systems it is annoying that you waste space with seldom used
> > functions.
> > 
> > Any oppinions?
> > 
> > Florian

Hi everybody,

I have two suggestions regarding new modules:

The first is an addon-Mixer for filters and similar modules: If I want to
mix several CV _AND_ several Audio-Signals for one Filter, I need two
Modules. But usually I do not need all four inputs of a mixer. So my new
mixer consists of a three channel audio mixer and a two channel dc-mixer
for control voltages with an additional 1:1-feedthrough for the CV-Bus, and
finally a row of three Multiples to get additional outputs:


 o-POTI-+ /----o  -> to Audio-In
   log  | | 
 o-POTI-+-/ 
   log  |   /--o  -> to CV1-In   
 o-POTI-+   |  
   log      |  o
            |  |
 o-POTI-+---/  o  Multiples
   lin  |      |
 o-POTI-+      o
   lin  |
        ^ 
    from CV-Bus




The other idea is, that I do not need double modules like the A170 or the
A162, or A175, A150, A148, A130. So the suggestion would be to produce
combined modules, that provide different functions. Especially for smaller
(3HE) systems it is annoying that you waste space with seldom used
functions.

Any oppinions?

Florian