Patches and discussion for Ensoniq VFX family

Try checking the fuses.  There are 5 fuses the top two sometimes blow,
 if you have a bad connection on a ribbon cable.  check those too. 
fuses one and two ( the top two) will cause no display/ seemingly dead
machine if one or both is bad.


--- In Ensoniq-VFX-SD@yahoogroups.com, "tony johanson" <tjiyf@h...> wrote:
> Thanks for the quick response , but the problem i have is that my
SD1 does 
> not even reach the calibration page, all i get is the disk drive led
light 
> up briefly then nothing, i.e., blank screen and no sounds.
> 
> Tony.
> 
> >From: "Claus" <clauzii@j...>
> >Reply-To: Ensoniq-VFX-SD@yahoogroups.com
> >To: Ensoniq-VFX-SD@yahoogroups.com
> >Subject: [Ensoniq-VFX-SD] Re: SD1 Power up.
> >Date: Fri, 20 May 2005 16:03:22 -0000
> >
> >BTW. there is a PDF in the FILES>TOOLS section called ´VFX Cal Error
> >Repair´ if U want to dig in to it!
> >
> >