Patches and discussion for Ensoniq VFX family

In regard to these fuses you mention.  I just remembered something 
about 2 of the fuses I saw inside my board that are wrapped in 
foil!!..Maybe that is my problem?..what the foil all about?..how do I 
replace them?--- In Ensoniq-VFX-
SD@yahoogroups.com, "cinesfloggingboy" <cinesfloggingboy@y...> wrote:
> 
> Try checking the fuses.  There are 5 fuses the top two sometimes 
blow,
>  if you have a bad connection on a ribbon cable.  check those too. 
> fuses one and two ( the top two) will cause no display/ seemingly 
dead
> machine if one or both is bad.
> 
> 
> --- In Ensoniq-VFX-SD@yahoogroups.com, "tony johanson" <tjiyf@h...> 
wrote:
> > Thanks for the quick response , but the problem i have is that my
> SD1 does 
> > not even reach the calibration page, all i get is the disk drive 
led
> light 
> > up briefly then nothing, i.e., blank screen and no sounds.
> > 
> > Tony.
> > 
> > >From: "Claus" <clauzii@j...>
> > >Reply-To: Ensoniq-VFX-SD@yahoogroups.com
> > >To: Ensoniq-VFX-SD@yahoogroups.com
> > >Subject: [Ensoniq-VFX-SD] Re: SD1 Power up.
> > >Date: Fri, 20 May 2005 16:03:22 -0000
> > >
> > >BTW. there is a PDF in the FILES>TOOLS section called ´VFX Cal 
Error
> > >Repair´ if U want to dig in to it!
> > >
> > >