no sound to my sd1
2008-10-18 by ansynel
hello, have you ever had this problem? Calibrating is ok ; every thing works but no sound! I thins it's an electronic problem.I have a second sd1(21) for pieces. have you any suggestions? Jak
Thread
no sound to my sd1
Re: no sound to my sd1
2008-10-23 by surfermarketing
Have you checked all outputs including headphone,at full volume (use headphones to check, don't wntto blow out your speakers. Mark
RE: [Ensoniq-VFX-SD] Re: no sound to my sd1
2008-10-23 by Jak Galra
yes i do;there 's no sound even headphone;in beginning the ; sound was very dirty and next nothing!
thanks for your answers
jak
To: Ensoniq-VFX-SD@yahoogroups.com
From: surfermarketing@...
Date: Thu, 23 Oct 2008 02:23:22 +0000
Subject: [Ensoniq-VFX-SD] Re: no sound to my sd1
Souhaitez vous « être au bureau sans y être » ? Oui je le veux !
thanks for your answers
jak
To: Ensoniq-VFX-SD@yahoogroups.com
From: surfermarketing@...
Date: Thu, 23 Oct 2008 02:23:22 +0000
Subject: [Ensoniq-VFX-SD] Re: no sound to my sd1
Have you checked all outputs including headphone,at full volume (use
headphones to check, don't wntto blow out your speakers.
Mark
headphones to check, don't wntto blow out your speakers.
Mark
Souhaitez vous « être au bureau sans y être » ? Oui je le veux !
Re: no sound to my sd1
2008-11-02 by oxygeno1313
Hi, Can you hear "HISS" when you plug the cable,or any "POP" sound when you turn on the synth ? Check the volumen slider pot, probably the carbon trace its broken. Did you already reinitialized ? good luck
RE: [Ensoniq-VFX-SD] Re: no sound to my sd1
2008-11-02 by Jak Galra
the sound is very low and dirty.
I'm very sad cause i love this synth and nobody have the plans to repair it
Thanks
To: Ensoniq-VFX-SD@yahoogroups.com
From: oxygeno1313@...
Date: Sun, 2 Nov 2008 05:52:40 +0000
Subject: [Ensoniq-VFX-SD] Re: no sound to my sd1
Votre correspondant a choisi Hotmail et profite d'un stockage quasiment illimité. Créez un compte Hotmail gratuitement !
I'm very sad cause i love this synth and nobody have the plans to repair it
Thanks
To: Ensoniq-VFX-SD@yahoogroups.com
From: oxygeno1313@...
Date: Sun, 2 Nov 2008 05:52:40 +0000
Subject: [Ensoniq-VFX-SD] Re: no sound to my sd1
Hi,
Can you hear "HISS" when you plug the cable,or any "POP" sound when
you turn on the synth ?
Check the volumen slider pot, probably the carbon trace its broken.
Did you already reinitialized ?
good luck
Can you hear "HISS" when you plug the cable,or any "POP" sound when
you turn on the synth ?
Check the volumen slider pot, probably the carbon trace its broken.
Did you already reinitialized ?
good luck
Votre correspondant a choisi Hotmail et profite d'un stockage quasiment illimité. Créez un compte Hotmail gratuitement !
Re: no sound to my sd1
2008-11-05 by oxygeno1313
Hi again, it seems that the problem is the final opamp. I don't have a SD-1 schematics to check it. But i think it use a THAT opamp. > > the sound is very low and dirty. > I'm very sad cause i love this synth and nobody have the plans to repair it > Thanks >
RE: [Ensoniq-VFX-SD] Re: no sound to my sd1
2008-11-05 by Jak Galra
ok i'll give the info to an electronic reparator.I hope that is the solution.
Thanks .
Jak
To: Ensoniq-VFX-SD@yahoogroups.com
From: oxygeno1313@...
Date: Wed, 5 Nov 2008 16:43:43 +0000
Subject: [Ensoniq-VFX-SD] Re: no sound to my sd1
Hi again,
it seems that the problem is the final opamp. I don't have a SD-1
schematics to check it. But i think it use a THAT opamp.
>
> the sound is very low and dirty.
> I'm very sad cause i love this synth and nobody have the plans to
repair it
> Thanks
>
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre mobile !
Thanks .
Jak
To: Ensoniq-VFX-SD@yahoogroups.com
From: oxygeno1313@...
Date: Wed, 5 Nov 2008 16:43:43 +0000
Subject: [Ensoniq-VFX-SD] Re: no sound to my sd1
Hi again,
it seems that the problem is the final opamp. I don't have a SD-1
schematics to check it. But i think it use a THAT opamp.
>
> the sound is very low and dirty.
> I'm very sad cause i love this synth and nobody have the plans to
repair it
> Thanks
>
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre mobile !
Re: [Ensoniq-VFX-SD] no sound to my sd1
2008-12-19 by Ted Morris
Older midi systems had a cut off built into the midi battery circuit. When the battery fails, the machine quits making sound. You might need to change the battery in the midi circuit. I don't know if the SD-1 has the cutoff in it, but I know it is supposed to tell you when the battery is failing. One time I accidentally plugged the amp connections in wrong and thought the SD-1 was failing. No sound might be a bad cord, a jack or plug that isn't all the way in, or an onboard fuse. --- On Sat, 10/18/08, ansynel <ansynel@...> wrote:
Show quoted textHide quoted text
From: ansynel <ansynel@...> Subject: [Ensoniq-VFX-SD] no sound to my sd1 To: Ensoniq-VFX-SD@yahoogroups.com Date: Saturday, October 18, 2008, 9:43 AM hello, have you ever had this problem? Calibrating is ok ; every thing works but no sound! I thins it's an electronic problem.I have a second sd1(21) for pieces. have you any suggestions? Jak ------------------------------------ Yahoo! Groups Links