Fairlight-CMI

Hi Brian,

In principle, Rev6.03 should be supported as well. However, the
problem is how to connect one of those old disks with 256byte
low-level block size to a modern PC or Mac... (Perhaps the Linux SCSI
driver could be modified to support 256byte block size?)
Wavesuper machines (Rev9 and higher) with a firmware upgrade are much
easier to use since they support 512byte blocks.

Best regards,
Michael

--- In Fairlight-CMI@yahoogroups.com, Brian Ronn <brian_ronn@...> wrote:
>
> Hi Michael
>    
>   This is very nice. 
>    
>   Will this voice converter also work work on a Series III OS6.03
system?
>    
>   Best regards
>    
>   Brian
> 
> kmi9000 <kmi9000@...> skrev:
>           Hi,
> 
> There is a new release of cmios9 available (2.3-beta5) that can
> convert WAV-files to voice files for the CMI Series III -> play any of
> your samples on a CMI!
> (Vice versa, you can also convert CMI voice libraries to a set of
> WAV-files.)
> 
> I've also uploaded a zipped file of diskimage templates for 4GB drives:
> 1) A system disk, containing four K and one C partition
> 2) CMI sound disk, one large partition
> 3) MDR disk, one large partition
> Please note that these files contain freshly formatted file systems
> (and thus are quite small since the rest of the 4GB can contain just
> zeros).
> 
> Regards,
> Michael
> 
> 
> 
>          
> 
>  		
> ---------------------------------
> 
> Alt i én. Få Yahoo! Mail med adressekartotek, kalender og notesblok.
>