Fairlight-CMI

Hi Glenn,

Without warranty, here are the schematic values:

CR 4 and 5 are 5 volt Zener diodes, part MBR 120p
R16 = 100 K
R13 = 470 R
C16 = 10 n
C17 =  1 micro polar

What is the item number for that philips capacitor ?
C9 = 4,7 micro polar
Haven't seen any 47 in the schematics for the q133.

Best regards,
Harald

> (like C17) (CR4 and 5 too faded too read on a black background)ideally the
> complete list for the whole board (in a dream, for all the boards IIX and
> III) that would be a really really cool reference tool if accurate and
> complete, by rev number
> or can you confirm on Q133 R6 CR (from IIX,  there are different values on
> the series III and MFX Q133's from what's on this):
> (parts around the battery)
> resistorsR16 100kohm? mind's kind of blurrry on the first band, presume it
> was brown, then clearly black, yellow with a silver tolerance band. Feel
> like it will come apart if I try to remove it to test with voltmeterR13 
> capacitorsC16C17
> diodesCR4CR5
>
> on the Q133 R6 -CR
>  Any line on a good source for the low profile metallic blue 47 microfarad
> 25 volt  philips capacitors that line this and other pcb's?  there's a"T"
> on the  packaging but it doesn't look like a tantalum capacitor. Is there
> a tantalum electrolytic. Any help on finding the right part would be a
> boon.
> Each line of text, around the electrolytic looking capacitor, reads:
> 47µ T,25VPhilips030K0S 7 (probably inconsequential)
> does it matter if a cap rated at 35V is used? It looks like there are
> different performance ratings by types of caps, some say audio, some say
> general use, don't want to use anything that would cause anything to fall
> out of spec, even maybe
> can anyone advise, please on detailed intuitive (for this novice user)
> specs and or a source, I guess the part of philips that made these was
> bought by Vishay but don't see a compatible part number?
> Thanks in all cases 
> Glenn