Fairlight-CMI

this is very interesting!.. flipping though disks is the most tedious part of constructing a song on the IIx having all the sounds available at once would be a dream.  



--- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@...> wrote:
>
> Good points ! I didn´t really think it through about haveing it on a card 
> inside the CMI. One must be able to access the buttons on the HCX.
> 
> How does the writing to the card work when you are making a sequence ? Any 
> problems with that ?
> 
> WT
> 
> ----- Original Message ----- 
> From: "tama_rat" <britt@...>
> To: <Fairlight-CMI@yahoogroups.com>
> Sent: Wednesday, September 19, 2012 9:56 PM
> Subject: [Fairlight-CMI] Re: HxC and CMI IIx Floppydrive replacement
> 
> 
> 
> 
> Hi everyone, sorry I haven't been able to reply sooner -- too much 
> (non-Fairlight) stuff going on!
> 
> I'd like to make a CMI retrofit kit for the HxC, and probably will, but it 
> will likely take a while.  I've only got a little time on the weekends to 
> work on it.
> 
> The older machines have the full-height floppy drives but the newer ones 
> have the half-height drives with a painted metal bezel/cover to fill the 
> extra space.  Take a look a the pictures of my machine in the photos section 
> and you'll see what I mean.
> 
> That metal frame comes out pretty easily.  What I'd like to do is make a 
> replacement frame that includes a cutout for the 3.5" drive form factor HxC. 
> That would let you keep the existing drives installed, and you wouldn't need 
> to cut any metal.  I found a local metal shop that I think can make the 
> frame, but have not had time to visit them yet.
> 
> I'd also like to put a couple of small switches on that frame to let you 
> select whether the HxC or old drive(s) is(are) used.
> 
> For adapting the ribbon cable that carries the floppy signals, I am using a 
> board I made long ago when I was experimenting with 3.5" drives on the CMI. 
> I would want to make a few changes to the board before releasing it.
> 
> We also need to get power to the HxC.  I made an adapter cable that the 8" 
> drive cable plugs into, but it is a older connector that I don't think is 
> easily found.  I want to find a better option for that power connection.
> 
> I like the idea of mounting the HxC inside the card cage, but think it won't 
> be very practical -- you really want access to the buttons and display on 
> the front of the unit.
> 
> The converted disk images are each 3.2MB.  If you have a 1GB SD card, that 
> will hold over 300 CMI disks!
> 
> Joe
> 
> 
> --- In Fairlight-CMI@yahoogroups.com, "dvdborn" <dvdborn@> wrote:
> >
> > Me too!
> >
> > David
> > http://dvdborn.blogspot.com
> >
> >
> > --- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@> wrote:
> > >
> > > I´m in !
> > >
> > > WT
> > >
> > > ----- Original Message ----- 
> > > From: "Peter K." <synthserv@>
> > > To: <Fairlight-CMI@yahoogroups.com>
> > > Sent: Sunday, September 16, 2012 5:42 PM
> > > Subject: [Fairlight-CMI] HxC and CMI IIx Floppydrive replacement
> > >
> > >
> > > First of all: Thanks very much Joe for your help. . I read on the HxC 
> > > forum
> > > that problems with image seem to be solved.
> > > (http://torlus.com/floppy/forum/viewtopic.php?f=18&t=118&p=6950#p6950)
> > >
> > > Next step would be creating a frontplate, same size as one floppydrive,
> > > holding two HxC "floppydrives" and one switch, so one of the HxC
> > > "floppydrives" can be switched with the remaining, original floppydrive, 
> > > so
> > > 8" discs can be copied to the HxC "floppydrive".
> > >
> > > Perhaps we can do this as a group in order to keep costs down?
> > >
> > >
> > > Regards,
> > >
> > >
> > > Peter Kersten.
> > >
> > > From: Gordon JC Pearce
> > > Sent: Wednesday, September 12, 2012 8:18 PM
> > > To: Fairlight-CMI@yahoogroups.com
> > > Subject: Re: [Fairlight-CMI] Re: "CMI Plug" 4 Gbyte bootable drive on a 
> > > SCSI
> > > connector!
> > >
> > >
> > >
> > > On 12/09/12 18:59, James Thomson wrote:
> > > > Hi Joe,
> > > >
> > > > Thanks for all of your hard work in bringing such exciting
> > > > developments for the CMI 2X. You first gave us the USB mouse and TFT
> > > > monitor adaptor and now it looks like we will soon be able to use a
> > > > modern storage solution ! Please keep us up to date. Thanks !
> > > >
> > >
> > > I reckon you're all thinking too small and too expensive.
> > >
> > > *Everyone* who uses a sampler with SCSI runs into this bother. The E-mu
> > > ESI list (before the moderator stopped approving posts) had a couple of
> > > people a month looking for something like this - and that's just one
> > > make and model, with the people who knew what they wanted to ask for.
> > >
> > > Pump them out to everyone that uses SCSI samplers, and even old
> > > computers with SCSI disks. You'll get your volumes up and your prices
> > > down. Everyone wins.
> > >
> > > -- 
> > > Gordon JC Pearce MM0YEQ
> > >
> >
>