Fairlight-CMI

I had the analog XLR sample inputs stop working in my SIII and after checking the board, pushed down on the socketed IC's and that resolved it. Its worked perfectly ever since. 

Not sure if it helps but it might be worth a try.

Regards, Marty






________________________________
 From: WT <waveterm@telia.com>
To: Fairlight-CMI@yahoogroups.com 
Sent: Wednesday, 13 March 2013, 22:02
Subject: Re: [Fairlight-CMI] Mic & Line inputs don't work, ADC direct does work
 

  
Ask Stephan Schällman, he had the same problem 
earlier. I don´t think he resolved it.
 
WT
 
----- Original Message ----- 
>From: dvdborn 
>To: Fairlight-CMI@yahoogroups.com 
>Sent: Wednesday, March 13, 2013 10:53  PM
>Subject: [Fairlight-CMI] Mic & Line  inputs don't work, ADC direct does work
>
>  
>I wasn't expecting to launch a new call for help so soon on the forum. But  unfortunately here goes...
>
>I use my IIx a lot for sampling and have 
  always used the line input to do so.
>
>Now, the line input as well as the 
  mic input don't work anymore. Page 8 shows no incoming signal.
>
>The ADC 
  direct input still does work and I can sample using that input in combination 
  with a DI-box. 
>So the problem doesn't appear to be with the CMI02 
  card.
>
>I've checked the XLR connectors and the cables that go to the 
  CMI-04 board. These connections are still OK. I've also checked the 10-way 
  ribbon cable that goes to the CMI02 card and it's also OK.
>
>I'm having 
  the exact same problem with a second IIx (the one that I was able to bring 
  back to life a few days ago).
>
>My first guess is a problem on the CMI-04 
  board. But before I start debugging that board I'd like to hear if anyone else 
  has ever encountered this problem and knows what the origin of it might 
  be.
>
>Best,
>David
>
>