Fairlight-CMI

On 27 Sep 2004, at 15:34, Fairlight-CMI@yahoogroups.com wrote:

>
> There are 3 messages in this issue.
>
> Topics in this digest:
>
>       1. Re: Series III strife
>            From: "buchla300" <david.morley@gmx.net>
>       2. Re: Re: Series III strife
>            From: feldmann@xs4all.nl
>       3. RE: Re: Series III strife
>            From: "Peter Connelly \(Core Design Ltd.\)"  
> <PeterC@Core-Design.com>
>
>
> _______________________________________________________________________ 
> _
> _______________________________________________________________________ 
> _
>
> Message: 1
>    Date: Mon, 27 Sep 2004 09:42:02 -0000
>    From: "buchla300" <david.morley@gmx.net>
> Subject: Re: Series III strife
>
> --- In Fairlight-CMI@yahoogroups.com, "RY Stroh" <rystroh@y...>
> wrote:
>> Hi David,
>>
>> I suppose you already tried the following:
>> - extract your Q777
>> - try to boot
>> - turn it off
>> - try to press the Eprom on the Q777
>> - put the Q777 back in place
>> - try to boot
>> Do you get any change ?
>> Cheers
>>
>> Ry
>>
>>
>> I just tried and
> a) there is no EPROM in my Q777
> b) now it does nothing.....the scsi card clicks 3 times though and
> then the second light from the top stays on...
>
>
>
> _______________________________________________________________________ 
> _
> _______________________________________________________________________ 
> _
>
> Message: 2
>    Date: Mon, 27 Sep 2004 12:32:39 +0200 (CEST)
>    From: feldmann@xs4all.nl
> Subject: Re: Re: Series III strife
>
>>> I just tried and
>> a) there is no EPROM in my Q777
>> b) now it does nothing.....the scsi card clicks 3 times though and
>> then the second light from the top stays on...
>
> Hi David,
>
> Are you sure all cards are properly in the slots and all connectors are
> tight ? Given the fact that it happened after a move I would stronly
> suspect a card has loosened.
>
> Good luck !
> Harald.
>
>
> _______________________________________________________________________ 
> _
> _______________________________________________________________________ 
> _
>
> Message: 3
>    Date: Mon, 27 Sep 2004 11:50:24 +0100
>    From: "Peter Connelly \(Core Design Ltd.\)" <PeterC@Core-Design.com>
> Subject: RE: Re: Series III strife
>
> Yep, I too advise this. Most, if not all, of the front mounted cards  
> were loose when I received my Fairlight after shipment.
>
> P
>
> -----Original Message-----
> From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl]
> Sent: 27 September 2004 11:33
> To: Fairlight-CMI@yahoogroups.com
> Subject: Re: [Fairlight-CMI] Re: Series III strife
>
>
>>> I just tried and
>> a) there is no EPROM in my Q777
>> b) now it does nothing.....the scsi card clicks 3 times though and
>> then the second light from the top stays on...
>
> Hi David,
>
> Are you sure all cards are properly in the slots and all connectors are
> tight ? Given the fact that it happened after a move I would stronly
> suspect a card has loosened.
>
> Good luck !
> Harald.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> _______________________________________________________________________ 
> _
> _______________________________________________________________________ 
> _
>
>
>
> ----------------------------------------------------------------------- 
> -
> Yahoo! Groups Links
>
>
>
>
> ----------------------------------------------------------------------- 
> -
>
>