Fairlight-CMI

----- Original Message ----- 
From: "Att" <glenn234@pacbell.net>
To: <Fairlight-CMI@yahoogroups.com>
Sent: Wednesday, September 19, 2012 11:29 PM
Subject: [Fairlight-CMI] [Fairlight CMI] re: front panel replacement hinges



Well, since I bungled , hugely, with a misdirected email ( apologies to all 
concerned) I might as well say that what I won't be messing up are the 
replacement hinges I'm working on...:)

Everyone know what a drag it is when a front panel hinge breaks, so I'm 
working on prototypes of replacements ones, experimenting with metal, and 
with ABS plastic, with color and function matched to the originals, but a 
simplified design, versus something very close to the original in appearance

Reasonably priced.

I would appreciate any input or interest anyone would care to share here or 
offline

Should have something shipable within the next two months or so, which I'll 
be happy to let people know, on or offline, about

Again, sorry about the missend

-Glenn

Sent from my iPod

On Oct 2, 2013, at 6:07 AM, <jbemond@free.fr> wrote:

> Hi,
> 
> 
> 
> some news about Vero 13090 "plastic hinges" clone ? 
> 
> 
> 
> JB
> 
> 
> 
> ---In fairlight-cmi@yahoogroups.com, <deluca.larry@...> wrote:
> 
>  Please put me on the hinge list, too!!   Knowing me I should buy them in bulk. :-)
> 
> 
> 
> --- In fairlight-cmi@yahoogroups.com, <waveterm@...> wrote:
> 
> I´ll take a pair for sure as one of mine is broken. Might as well replace 
> both.
> 
> Let me know when you can ship.
> 
> WT
> 
> ----- Original Message ----- 
> From: "Att" <glenn234@...>
> To: <Fairlight-CMI@yahoogroups.com>
> Sent: Wednesday, September 19, 2012 11:29 PM
> Subject: [Fairlight-CMI] [Fairlight CMI] re: front panel replacement hinges
> 
> 
> 
> Well, since I bungled , hugely, with a misdirected email ( apologies to all 
> concerned) I might as well say that what I won't be messing up are the 
> replacement hinges I'm working on...:)
> 
> Everyone know what a drag it is when a front panel hinge breaks, so I'm 
> working on prototypes of replacements ones, experimenting with metal, and 
> with ABS plastic, with color and function matched to the originals, but a 
> simplified design, versus something very close to the original in appearance
> 
> Reasonably priced.
> 
> I would appreciate any input or interest anyone would care to share here or 
> offline
> 
> Should have something shipable within the next two months or so, which I'll 
> be happy to let people know, on or offline, about
> 
> Again, sorry about the missend
> 
> -Glenn
> 
> Sent from my iPod
>

  ----- Original Message ----- 
  From: Att 
  To: Fairlight-CMI@yahoogroups.com 
  Sent: Wednesday, October 02, 2013 5:14 PM
  Subject: Re: [Fairlight-CMI] RE: [Fairlight CMI] re: front panel replacement hinges


    

  Still working on it guys, sorry for the long paise, just been pinched for time. I should have some ready within 2 months, hopefully sooner.


  -Glenn


  Sent from my iPod

  On Oct 2, 2013, at 6:07 AM, <jbemond@free.fr> wrote:


      

    Hi,




    some news about Vero 13090 "plastic hinges" clone ? 




    JB




    ---In fairlight-cmi@yahoogroups.com, <deluca.larry@...> wrote:


     Please put me on the hinge list, too!!   Knowing me I should buy them in bulk. :-)




      --- In fairlight-cmi@yahoogroups.com, <waveterm@...> wrote:


      I´ll take a pair for sure as one of mine is broken. Might as well replace 
      both.

      Let me know when you can ship.

      WT


        ----- Original Message ----- 
        From: "Att" <glenn234@...>
        To: <Fairlight-CMI@yahoogroups.com>
        Sent: Wednesday, September 19, 2012 11:29 PM
        Subject: [Fairlight-CMI] [Fairlight CMI] re: front panel replacement hinges



        Well, since I bungled , hugely, with a misdirected email ( apologies to all 
        concerned) I might as well say that what I won't be messing up are the 
        replacement hinges I'm working on...:)

        Everyone know what a drag it is when a front panel hinge breaks, so I'm 
        working on prototypes of replacements ones, experimenting with metal, and 
        with ABS plastic, with color and function matched to the originals, but a 
        simplified design, versus something very close to the original in appearance

        Reasonably priced.

        I would appreciate any input or interest anyone would care to share here or 
        offline

        Should have something shipable within the next two months or so, which I'll 
        be happy to let people know, on or offline, about

        Again, sorry about the missend

        -Glenn

        Sent from my iPod

On Oct 3, 2013, at 11:00 AM, "WT" <waveterm@telia.com> wrote:

> 
> 
> I´ll buy 4 hinges when you have them ready.
>  
> WT
>  
> ----- Original Message -----
> From: Att
> To: Fairlight-CMI@yahoogroups.com
> Sent: Wednesday, October 02, 2013 5:14 PM
> Subject: Re: [Fairlight-CMI] RE: [Fairlight CMI] re: front panel replacement hinges
> 
>  
> Still working on it guys, sorry for the long paise, just been pinched for time. I should have some ready within 2 months, hopefully sooner.
> 
> -Glenn
> 
> Sent from my iPod
> 
> On Oct 2, 2013, at 6:07 AM, <jbemond@free.fr> wrote:
> 
>>  
>> Hi,
>> 
>> 
>> 
>> some news about Vero 13090 "plastic hinges" clone ? 
>> 
>> 
>> 
>> JB
>> 
>> 
>> 
>> ---In fairlight-cmi@yahoogroups.com, <deluca.larry@...> wrote:
>> 
>>  Please put me on the hinge list, too!!   Knowing me I should buy them in bulk. :-)
>> 
>> 
>> 
>> --- In fairlight-cmi@yahoogroups.com, <waveterm@...> wrote:
>> 
>> I´ll take a pair for sure as one of mine is broken. Might as well replace 
>> both.
>> 
>> Let me know when you can ship.
>> 
>> WT
>> 
>> ----- Original Message ----- 
>> From: "Att" <glenn234@...>
>> To: <Fairlight-CMI@yahoogroups.com>
>> Sent: Wednesday, September 19, 2012 11:29 PM
>> Subject: [Fairlight-CMI] [Fairlight CMI] re: front panel replacement hinges
>> 
>> 
>> 
>> Well, since I bungled , hugely, with a misdirected email ( apologies to all 
>> concerned) I might as well say that what I won't be messing up are the 
>> replacement hinges I'm working on...:)
>> 
>> Everyone know what a drag it is when a front panel hinge breaks, so I'm 
>> working on prototypes of replacements ones, experimenting with metal, and 
>> with ABS plastic, with color and function matched to the originals, but a 
>> simplified design, versus something very close to the original in appearance
>> 
>> Reasonably priced.
>> 
>> I would appreciate any input or interest anyone would care to share here or 
>> offline
>> 
>> Should have something shipable within the next two months or so, which I'll 
>> be happy to let people know, on or offline, about
>> 
>> Again, sorry about the missend
>> 
>> -Glenn
>> 
>> Sent from my iPod
> 
>