Homebrew PCBs

> ink esp the pigment ones seems to me 
> has many of the same properties as oil the dye based around the same
> 
> but copper isnt and will ignore the cyano acrilate fumes 

Well, you could explore that method, but it then would add a burden to 
the delicate process.

I feel curing the ink to the board may best lye in PREPARING the board 
before you print.  Somehow coat the board with a chemical that will let 
the ink adhere and seal, and still allow the etch to disolve the copper.

If only there was a good chemist around, I am sure that would be real 
handy right now.