Apple Logic Pro /LogicExpress Discussion

I checked monitoring off in all the programs and just connected only
inputs to the USB interface. Still the same. As I am typing this a day
later, I reinstalled the 10.4.11 update and I think the issue went
away.  Here is what I ran into, kinda funny.  Ran disk utility and
found an error on the drive.  My back up had the same error and I
could not boot from it.  Fixed the error, ran a new clean backup and
reinstalled the update.  After 17.min, I think my issue was solved.  I
did read on the forums about Logic having static issues with Alesis
USB hardware and some M-audio.  They stated the issue was with the
Leopard 10.5 USB drivers.  

--- In Logic_Cafe@yahoogroups.com, GAmoore@... wrote:
>
> I think that might be some type of feedback loop. As soon as I
upgraded to 
> Logic 8, and would go to record, I would get a bunch of feedback
even though the 
> input track was muted. I think they changed some features or set some 
> different defaults. If you look at the channel strip there is not
just M for mute and 
> R for record, but also I and something else. (I am not at Logic
now). It 
> could be that your monitoring the input, and its making a feedback
loop. If there 
> is a slight delay it would sound like a reverb, or it might make
noise or 
> distortion too.
> 
> 
> In a message dated 11/18/07 12:33:31 AM, rgsproductions2005@... writes
> 
> > have a weird reverb and static issue with
> > My Behringer USB interface whether I am in Logic
> > 
> 
> 
> 
> 
> **************************************
>  See what's new at http://www.aol.com
> 
> 
> [Non-text portions of this message have been removed]
>