Yahoo Groups archive
Messages
Page 13 of 56 · 2770 messages matched
2008-11-13 by Don Kim
An attenuating offset Elf would be great! :D Could bring new life to many modules too. -Don --- On Tue, 11/11/08, metafoetus2002 wrote: From: metafoetus2002 Subject: [PLAN_B_analog_blog] Re: Model 37 Elf LFO Waveshape Question To: PLAN_B_analog_blog@yahoogroups.com Date: Tuesday,
2008-11-12 by metafoetus2002
Hi Peter, thanks much, that's awesome! Best regards, Jan-Hinnerk --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > > Model 10, Mk 3: A switch for both retrig and non-retrig ops: I > wrestled with this one, a lot and elected against it only be
2008-11-12 by elemental
Ok. I think I've worked out what happened. The guy who sold it to me sent it with ribbon cable attached. I assumed that the power end would be the right way round. Well, I compared it to some other cables I had lying around. Looks like it goes the other way... anyway, I've tried
2008-11-12 by elemental
OK, done some more testing with this today, and it seems that everything else works, and actually the buzzing power supply doesnt seem to be a problem - seems pretty much the same with or without the M15 plugged in. My problem is that the M15 outputs a buzz (seems to be the same
2008-11-12 by elemental
Oh and its the Rev 1, with the board sticking out at the back. --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > > Are u saying the VCO does not function, that it's silent and it makes > the PSU buzz, or are you saying it operates and the PSU
2008-11-12 by elemental
Hi Peter Its not functioning at all. All the outputs of the M15 (and an AFG I also tested while the M15 was plugged in) seem to output the buzz of the ower supply. It seems to be tripping the power supply as nothing else functions. If I take it out everything is fine again. I als
2008-11-12 by (i think you can figure that out)
Hey guys - Cool that you're using the blog here to discuss modules sales - the initial postings are fine, but could I ask that you send these types of follow up/ negotiation letters to one another as opposed to the whole group? thanks in advance, - P --- In PLAN_B_analog_blog@yah
2008-11-12 by (i think you can figure that out)
Are u saying the VCO does not function, that it's silent and it makes the PSU buzz, or are you saying it operates and the PSU busses along with it? Which model to you have: the Rev 1 series or the Rev. 2 series? If 1: Are you making sure the red band is UP on the module side and
2008-11-12 by (i think you can figure that out)
I actually thought about a non-ac model 37 - but given it goes into the audio range and beyond i felt it best to keep it both sides of ground. Push pots - no can do in an ELF: too large under the panel. The iceberg effect would have the sides of the pot sticking out the ends of t
2008-11-12 by elemental
I just received a Model 15 VCO I bought 2nd hand, shipped from Italy to UK. When plugged in (and double checked its all correct) to the power supply in my Analogue SOLUTIONS case I get nothing but a buzzing from the power supply. If I take it out all is fine again. I've had this
2008-11-12 by Bakis Sirros
hello Brian, i decided to keep the rest of the doepfer modules i had for sale. thanks, best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. my
2008-11-12 by metafoetus2002
Hi Peter, yes, I guess it will be pretty packed inside the ELF LFO. Option 2 is nice, as I already have a Model 14. The only thing that bugged me is that I have to devote a complete 3-in-1- bipolar-mixer with-offset to achieve just an offset. I figure that you already get more th
2008-11-12 by argitoth
Thanks, I'll be waiting for your tests!
2008-11-12 by (i think you can figure that out)
Wellll.... Hmmm...within the module it'll be a bitch, especially the Square/Pulse port. But you could add a couple of op amps, one just inverting with ground going to the reference input (in this case the +) and the second also inverting, yet with a trim pot going from the - and
2008-11-12 by (i think you can figure that out)
Elan, The M31 should be fine with 1V/Oct. Listen, I'm teaching tonight but when I get home I'll check mine here. I'd do it now but I moved my Midi interface and I think i plugged some of the I/Os to the wrong destinations. I've made careful and accurate voltage measurements and I
2008-11-11 by argitoth
Hey Peter, I just purchased MX224 buffered mixer/multi and I am returning them back to Noisebug because they aren't good for routing 1v/oct signals. I am going to replace them with Model 31. Can I use the Model 31 to multiply 1v/oct signals without significant pitch tracking issu
2008-11-11 by metafoetus2002
Hi Peter, thanks for the welcome and the explanation. Is there an easy mod that would make just the sawtooth output swing positive only? Best regards, Jan-Hinnerk --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > All of the waveforms on the M
2008-11-11 by Loren Nerell
That time of the month again, hopefully the last time I have to do this. Here is what I am offer at the moment: Analogue Systems: RS70 Inverter/Preamp $115 RS90 VCO $100 (I have 3 of them) Doepfer A-101-2 Low Pass Gate $80 A-107 multitype morphing filter $275 A-117 Digital Noise/
2008-11-11 by brian
hello, Is the A119 still available? Also, how much would shipping be to Chicago, USA? Thank you, Brian Labycz --- On Mon, 11/10/08, Bakis Sirros wrote: From: Bakis Sirros Subject: [PLAN_B_analog_blog] Re: FS:Doepfer A188-1 BBD (512),A106-1 Xtreme VCF,A119 External Input,A145 LFO
2008-11-11 by Bakis Sirros
i am also selling: A119 External Input/Envelope Follower: (price 70% of new): 69.3 usd Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist --- On Tue, 11/11/08, Bakis Sirros wrote: > From: Bakis Sirros > Subject: Re: FS:Cyndustries ZerOscillator (frac),Doepfer A188-1 B
2008-11-10 by Bakis Sirros
the A137, Cyndustries Zeroscillator, A162 are sold. the A106-1, A188-1, A145, A145 are still available. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist --- On Mon, 11/10/08, Bakis Sirros wrote: > From: Bakis Sirros > Subject: FS:Cyndustries ZerOscillator (frac),Doe
2008-11-10 by Bakis Sirros
also for sale: Doepfer A137 WAVE MULTIPLIER: (price 70% of new) 112 USD. --- On Mon, 11/10/08, Bakis Sirros wrote: > From: Bakis Sirros > Subject: FS:Cyndustries ZerOscillator (frac),Doepfer A188-1 BBD (512),A106-1 Xtreme filter,A162 Dual Trigger delay,A145 LFO (x2) > To: "Doepfe
2008-11-10 by Bakis Sirros
hi List, i am selling the following, in fine working and cosmetic condition (screws and ribbon included): CYNDUSTRIES ZEROSCILLATOR (FRAC RAC): 796 USD (80% price of new) DOEPFER A188-1 (512 STAGES), its the old version front panel module but the functions, knobs and inputs and o
2008-11-10 by hulmedan
Will pay via paypal, thanks!! Dan
2008-11-09 by (i think you can figure that out)
Hey Jan... Welcome to the group. All of the waveforms on the M37 are AC, swinging both sides of ground. That being said, know that the pulse width of the Pulse Out is severe. It'll trigger things like M10's, Miltons and Blacet EG1's that don't give a hoot how long the incoming ga
2008-11-09 by metafoetus2002
Hi, I am new to this group, located in Germany and a lucky owner of the Model Volt Proc, as my Cwejman S1 MkII is a bit short on freely accessible mixers, let alone crossfaders or Peak/Trough processors. To further enhance my setup, I am interested in the Model 37 Elf LFO and hav
2008-11-08 by (i think you can figure that out)
I'm selling my Doepfer A-134 Panner in perfect operational condition and fitted with red LEDs, not blue. As to why I am unloading it and knowing how much I utilize panning in my own music, feel free to come to any conclusion you wish (wink wink). Let's just say I'm testing some i
2008-11-08 by Steven Taylor
On 6 Nov 2008, at 22:34, Sean Williams wrote: > if the pound recovers a bit against the dollar I'll be queueing up > for a few modules myself. Yeah it's a bitch!... I've had to seriously scale back my plans due to that. Buying stuff from the US is suddenly not attractive after sh
2008-11-08 by (i think you can figure that out)
Hey guys, Just a word to give you the 411 of what's up for the next couple of months and we're currently laying out the PCB set for the Vector Plotter, followed quickly by the Triple VCA. Phil Gallo and I will be having a session tomorrow on the Milton processor to gear it toward
2008-11-07 by Bakis Sirros
the a192 is also sold. the A108 and A110 are stil for sale. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist --- On Thu, 11/6/08, Bakis Sirros wrote: > From: Bakis Sirros > Subject: Re: FS:Doepfer A110 vco,A108 vcf,A192 cv to midi, A141 vc-adsr,A179 light to cv(Lowe
2008-11-07 by r_a_quirk
if anyone here has both a model 15 & an elf wave splicer, I'd recommend that they get a dual leveller as it really complements them. I use one half for attenuating the pwm (which makes it easier to get the pulse sweetspots) and for attenuating the wave splicer c/v input. such a s
2008-11-06 by Sean Williams
Hi Peter I too have not come across any of the ranting posts about Plan B quality issues. My colleague Jules has a few Plan B modules in his predominantly Doepfer setup and frequently makes me jealous whenever he patches in the Low-pass gate or Polyphonic Envelope. I have heard n
2008-11-06 by Bakis Sirros
hello, selling this, model 24, in fine cosmetic and working condition price is: 206.25 USD plus 10 usd shipping and 4% paypal fees. thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. my
2008-11-06 by junglephone
Far as I can tell, your rep is doing just fine. Some people need to act out. The internet is an anonymous, safe place to shoot off one's mouth. It's inevitable that some will do this, and even though they know darn well they have the kind of access to you that would resolve their
2008-11-06 by Steven Taylor
Well if it's any consolation... I read a lot about synths daily and I haven't come across these rants. I remember reading about tuning issues with the oscillator but they never seemed to get particularly heated. In fact the first I heard about the production problems was when you
2008-11-06 by (i think you can figure that out)
Wow...we've shipped over 45 of these since they were released. Good to know we hit the ball on this one. Carlos, drop me a line offlist and thanks - - P --- In PLAN_B_analog_blog@yahoogroups.com, "Carlos" wrote: > > any idea when these will be back in stock? > > I need a second o
2008-11-06 by Carlos
any idea when these will be back in stock? I need a second one... thanks! C.
2008-11-06 by (i think you can figure that out)
Jonathan Betton, back from an extended trip to Colorado has returned to LA and with that returns to the Plan B squadron, making our body count now 7 strong: Sam Hernandez (hes the gy to mail your xmas gifts to) Sergio Trejo Dylan Sang Kateri Lirio Elais Angulo Jon Betton Me Pleas
2008-11-06 by (i think you can figure that out)
..and the $59,999 answer is: to coin a phrase of President Obama (yay!!!), "yes you can" drive the M15 - any of them, old or new - from 15 volts. My suggestion is you try it as is and see if you like the tracking and if not, there are some changes which may get you back to the ex
2008-11-06 by (i think you can figure that out)
This issue has come up twice now in the last few weeks, some of which stemming from the recent and I dare say contagious Plan B puke-fest which has bubbled up from the underbelly of internet blogs over the last few weeks (do I sound spiteful?). Comparisons have been made between
2008-11-05 by Bakis Sirros
hello, i am selling these four doepfer modules. all items in fine working and cosmetic condition, screws and ribbon cable included. payment via paypal, shipping per module is 10usd to anywhere, but if you buy more than 1 modules shipping will still be 10usd for you. paypal fees i
2008-11-05 by mritenburg
I've kicked the idea around. Physically, by turning the PCBs sideways, two M15 MkII modules will fit *snuggly* behind a buchla 1PU panel (ala 258!?!? who wudda thought?) Swapping out the jacks for banana plugs where appropriate is elementary. The finished module would be about as
2008-11-04 by James Cigler
The mkII M15 should, it's only about 1" deep. The mkI definitely wouldn't though. That's about all I could say, I have no idea on how the power connections and everything would work out. -james On Nov 3, 2008, at 10:06 PM, "cray5656" wrote: Hi all Just wondeing if the depth of th
2008-11-04 by (i think you can figure that out)
We are pleased to announce that the first delivery in a 25 piece "hot or not???' initial order of Model 31 Buffered Mults will be at Noisebug by day's end. The 22nd released product in the Plan B line, the M31 is the first utilizing our new (NON-Cliff) jacks and offers significan
2008-11-04 by cray5656
Hi all Just wondeing if the depth of the Plan B VCO would fit into a 200e cabinet> I have a spare 200e faceplate and would like to somehow fit the PB VCO into the cabinet.
2008-11-03 by sascha.victoria
Any news on when the Milton series will be released? thanks!
2008-11-01 by Anthony Rolando
Hey, I was borrowing one of these from a friend, and it would not self-cycle. I replaced D4 and all was good. You can find the proper diode at most radio shacks. Look for Small Signal Fast Switching Diodes, or typr 1N4148 or 1N914. It is very easy to get at the part. MIND POLARIT
2008-11-01 by amnesia
Re: M10 blow up Peter care to tell us what euro manufacturers to stay clear of with this issue? I just like most people plug every company into everyone else...will there be a fix to this? > > >
2008-10-29 by hpsounds_fr
Hello, I've got some Doepfer, Plan B and Waldorf stuffs, shipping only in France and European Union. Here is the link to the post on my website: http://www.hpsounds.com/2008/10/29/materiel-de-musique-a-vendre/ Contact me via the CONTACT page on my website : http://www.hpsounds.co
2008-10-27 by Bakis Sirros
Hello, I decided to trade, or sell, my great condition Serge Touch Activated Keyboard Sequencer. (itsan STS era panel of course and I think it’s a hartland era panel as well. (I can confirm this on Wednesday, when I am in the studio) I really like it, but I have two in my serge s